stupify 10+ year member
CarAudio.com Elite
I have two amps up for sale.
The reason I'm putting the kicker amp up for sale cheap is because it has some scratches on the paint that go down to the metal. I bought the amp and sub from the same person who boxed them together and the sub hit the amp. So it scratched the top of the amp. Because of this I'm selling it cheaper then normal. Little spray paint would make it 100% better.
# 375 watts RMS x 1 at 4 ohms (750 watts x 1 at 2 ohms)
# variable low-pass filter (50-200 Hz at 24 dB per octave)
# variable bass boost (0-18 dB at 40 Hz)
# subsonic filter (12 dB at 25 Hz)
# wired remote bass level control
# Class D design
# CEA-2006 compliant
# speaker-level inputs
# preamp outputs
# fuse rating: 40A x 2
# 4-gauge power and ground leads with 80-amp fuse recommended — wiring and hardware not included with amplifier
# 14-3/4"W x 2-3/8"H x 9-11/16"D
Next is Massive CA200 here are the specs
2 x 75W @ 4 ohms (12.5V - 0.005% THD)
2 x 150W @ 2 ohms (12.5V)
2 x 350W @ 2 ohms (14.5V)
2 x 450W @ 1 ohms (12.5V)
2 x 1050W @ 1 ohms (14.5V)
1 x 2100W @ 2 ohms bridged (14.5V)
Fuse: 3 x 40A
Here are some pictures .. THEY ARE NOT MINE I WILL GET SOME TOMORROW BUT THIS IS SO YOU CAN SEE WHAT IT LOOKS LIKE ETC
Kicker $130 shipped *sold*
Massive $220 shipped
I have plenty of references if needed just ask
Friend has digital camera so I will get pictures tomorrow sorry for the delay
The reason I'm putting the kicker amp up for sale cheap is because it has some scratches on the paint that go down to the metal. I bought the amp and sub from the same person who boxed them together and the sub hit the amp. So it scratched the top of the amp. Because of this I'm selling it cheaper then normal. Little spray paint would make it 100% better.
# 375 watts RMS x 1 at 4 ohms (750 watts x 1 at 2 ohms)
# variable low-pass filter (50-200 Hz at 24 dB per octave)
# variable bass boost (0-18 dB at 40 Hz)
# subsonic filter (12 dB at 25 Hz)
# wired remote bass level control
# Class D design
# CEA-2006 compliant
# speaker-level inputs
# preamp outputs
# fuse rating: 40A x 2
# 4-gauge power and ground leads with 80-amp fuse recommended — wiring and hardware not included with amplifier
# 14-3/4"W x 2-3/8"H x 9-11/16"D
Next is Massive CA200 here are the specs
2 x 75W @ 4 ohms (12.5V - 0.005% THD)
2 x 150W @ 2 ohms (12.5V)
2 x 350W @ 2 ohms (14.5V)
2 x 450W @ 1 ohms (12.5V)
2 x 1050W @ 1 ohms (14.5V)
1 x 2100W @ 2 ohms bridged (14.5V)
Fuse: 3 x 40A
Here are some pictures .. THEY ARE NOT MINE I WILL GET SOME TOMORROW BUT THIS IS SO YOU CAN SEE WHAT IT LOOKS LIKE ETC
Kicker $130 shipped *sold*
Massive $220 shipped
I have plenty of references if needed just ask
Friend has digital camera so I will get pictures tomorrow sorry for the delay