Recent content by Burbarry

PMed you.

Ok you guys might own the Fatmat Mega Mat works great can be installed in any temp. Sticks like a SOB. It is almost impossible to get it off when it is stuck to metal, and forget it if you stick it to its self. That stuff is butyl. There is 3 different levels they sell.

give them to the wifey and put the old ones back on.

have you made sure that the tinsel leads are not messed up on one of the subs. Assuming there dual inputs. Might also get a multi meter maybe one is a different ohm load. might also have one that is on its way out.

look into getting this: PXE-H660 - ALPINE IMPRINT SOUND PROCESSOR AUDIO SYSTEM | eBay or if you want control of it up front by your deck then look into this: JBL MS-8 DIGITAL SOUND PROCESSOR LOGIC 7 AUTO EQ DSP | eBay The first one is a little better IMO as it comes with a mic and allows...

What exactly are you wanting to do? crossover the mids after the deck before the amp?

I wrote this on other sites but never posted it over here.

I use these but replace the wing nut with a real nut: Ancor Marine Lead Battery Terminals Negative with 5/16" Post 385641 Or you can use these, but might be hard to get 1/0 in there. that is why I use the ones above.

Review of:Sound deadener There is a lot of good info on here, but not much in the way of actual results. So here is the products that I have ran Dynamat Original, Dynamat extreme, Edead, Fatmat, Fatmat Xtreame, Fatmat Rattle trap XXX, Zilla mat, B-Quite, hushmat, and now Second Skin. Dynamat...

Review of Head Unit: Brand: Apline Model: CDA-9887 Rating: I would give it a 5 out of 5 Pros: Ok, so I just go my new head unit put in and it has 10 times better sound output then my last deck a Clarion VRX755 (which is a DVD/CD player). I think some of it might be going from 2 volt...

I think they sell used for around $400 IIRC.

There is a lot of good info on here, but not much in the way of actual results. So here is the products that I have ran Dynamat Original, Dynamat extreme, Edead, Fatmat, Fatmat Xtreame, Fatmat Rattle trap XXX, Zilla mat, B-Quite, hushmat, and now Second Skin. Dynamat original is good but you...

How about Rainbows? You will have to spend more. But high end to me is like $800 and up for mids.

I second test wires with a DMM, and check for missing fues's. Also, check to make sure your fuse is still good, with the DMM. I had one that looked good but was slightly broken could not see the crack in it without looking under a microscope. Took me a day to figure that one out.

Wish I could have went, had to work all weekend long