winkychevelle's latest activity

.

You revived a 14year old thread for that? Sounds like you need a 100buck amp to replace that old junker

My opinion is it's not enough power and that damping is an overrated spec. Typically damping is rated at 4ohm and is halved every time you half...

Pretty much. It's just a nice kit. A solo rite Scarlett 2i2, XLR mic and a loop back cable are my next purchases so I can get accurate phase...

The siq amps are Sq beast as well. And much cheaper. Made by s&I in Korea iirc

Helix and it's not even close Helix, mosconi, audison, minidsp, and jl are about the only ones I would recommend and in that order

The m2000 was only discontinued to be replaced with the m2500 iirc. Dd amps are generally plenty good and the 3500 series is probably the best...

You're looking at 2days with the tune possibly longer for a custom box. Run over to diyma to see build logs on the newer gm trucks they have...

Mine were as short as possible and still I had issues routing them cleanly

The umm1 is just a rebadged dayton/minidsp mic. I personally have a umik2 and use a regular usbc-usbc to hook it up to my laptop and a...

Just buy a knuconceptz kollossus 1/0 kit and add extra rcas. But to your answer no there isn't really alot of benifit in simple installs like...

The audio frog gb subs do have good output but aren't spl monsters I'd compare them to the w6 output wise while I believe they sound slightly...

Man you know you wanna do ib 10s in each kick

Pretty sure I'm going with the 4ohm 10inch ho to replace my adire koda 8 I screwed up. Either that or the dd vo-m10 but like you I'm using it as a...

It depends, I have spent a full 10hrs doing 2 amps, 8 speakers, 2 amp kits, radio, seat lift and subs. I also rerun wire to every driver. That...

While both corrode, CCA will corroded 10x faster, and carry less current. Knuconceptz kollosus is cheap enough to do it right the first time

You shouldn't need 2-4 layers I have a single layer over 90% of my application. I only have a couple of spots doubled because I spot covered with...

Personally I recommend stereo integrity speakers. M25, M3Carbon, TM65MKIV They also make fantastic Amps and subs Amps In the configuration you...

Resonix is the current best with Amazon and nvx being the next best for the money. Resonix when applied correctly in conjunction with the...

Rule of thumb maybe but motor force and the interaction of sub to enclosure can throw a huge wrench in that. I can tell you going from 2 Dayton...

I'm taking them off the midrange pods as they aren't needed. I have a set for the tweeters that are much more important but not installed in the...

I need to have Bob make me a couple of the laser inserts for the m3carbons

Not cheap but fairly priced. Asked a local machine for an off his head quote and he wanted about $500 for the 2 sets of pods in the picture...