*** Enclosure is 4.54ft3 tuned 31-32hz unloaded ***
Subtract driver displacement for final volume.
Example: 2 DD 712's displace .17ft3 each so...
Modeled and designed using an Xfl-15 (.17ft3 displacement)... no frills/basic ported enclosure utilizing less than one .75" 4x8 sheet.
*** Actual...
I used an Sa-12 classic for modeling. (.14ft3 displacement)
Mounting cutout: 11 1/8"
Depth available: over 12" (plenty)
Actual tuning is 34.75hz...
3/4" Russian Baltic Birch specific design (11/16" actual).
.75" materials
Precision port 3" kit recommended.
No cutsheet available, 3/4" materials
No cutsheet available, 3/4" materials.
I actually hate designing around these lil' monsters (everyone tries to fit them under their truck seat... lol)
Bada*s lil subs, for 8's they get...
This is for those small trunks/hatches, by no means the smallest but fairly small for 2 12s ported.
.75" materials
Basic space saver...
This is for 6ea of the Rds-6.5, Btw I've designed another for 4ea that turned an Eclipse windshield liquid (haha) and was just a lil' nasty...
This is a surprising result, just add power.
Actually this is for the small sub haters. I used to be one myself.
.75" materials
This one had a legit 5K on this setup and it was pretty nasty.
I'm by no means recommending a 5K for something like this, he put...
No cutsheets unfortunaltely, mechanical drawings only.
.75" materials
2x4 needed
Oldie but a goodie. please don't flame me for the port extending like it is designed. I was up late that night.
No cutsheets for this one...
.75" materials
Please note... the 48' x 18" 3/4" plexiglass rear panel is not on the cutlist.
Subs mount/access thru the plexiglass, magnets in...
Iirc this was specific to a Blazer K5 and having the port forward firing under the second row was requested. Sub mounting/access is thru the side...
This one went into a later model Camaro I believe. 3/4" Baltic Birch specific design (11/16" actual)
Why keep cramming your subs behind the seats when its inevitable that something like this is where you'll end up anyway. Most 12's with an EBP...
Create account or login to post/reply
You must be a member in order to post a message.
Create account
Register below to post messages:
Log in
Already have an account? Log in below:
New threads
-
Lithium 12v LifePo4?I understand people recommend Lto batteries over the LifePo4...
- Started by Bass911
- Replies: 1
-
FEATURED Need help with feedback.I've got a 2023 Ram 5500 cab and Chassis and it's got the...- Started by Steven Lature
- Replies: 6
-
TWO DSPs USING OPTICAL SPLITTER?I'm going to be using a smartphone as a HU with Foobar2000...- Started by Cee
- Replies: 3
-
Terrible oversized bandpass enclosure for 2 kicker compc 12”it’s my first subwoofer enclosure so idc that it’s ugly as...- Started by Wayne Clark
- Replies: 14
-
taramps md8000.1anyone know if i can run a md 8k 2 ohm at a .5 ohm load?- Started by fool lee 44
- Replies: 15
