Recent content by gettinlouder

well thanks for the input,i think im gonna go for 2.5 per sub unless someone chimes in with a response.and if anyone that knows how to use winiSD please let me know how it looked.i wont be able to start my box till 6am tomorrow so have 24hrs to figure it out.

no i tried couldnt find some of the values and now it wont load my save's. i know most people put them in a smaller box which is why i was leaning toward the 2-2.5 range after dicplacement and port.

so 4 cuft after displacement and port,and not sure what your talking about with the 20's

first off merry Christmas. I still have my pioneers (tsw3002d4), I ditched the mustang and now have a ton of room in my Durango but now I have came across so many box plans and even tried playing on winisd.i don't know which to choose, I just bought some mdf and have been staring at it,i have...

yea hate to say it but everyone iv known to by boss learned quick, i mean comon you can get a so called amp rated for 5000 watts which i would doubt it puts out half that for a 100 bucks somethings not right. and i would almost guarntee the subs cant handle the rated power.not trying to hate but...

the underside of the cone isnt cracked.i think the face is just a huge dustcover but when playing you can see it move.best i can get untill i get home.

gor a cheapo sub yea im sure its allright but with the resources of your friend owning a store and all i would definatly be looking for something else.i mean if i had a friend that owned a shop, alpine wouldnt even be in my mind.and even for a 100 im sure you can get much better.

you should probably hook them both up to a mulitmeter just to make sure that the other coil is reading right ohms and might as well check the good sub just to be sure.

from what i can find online,because iv never done from expierence,that you can indeed run a dvc with only using on coil.downside is your power handeling will be nearly cut in half.but they say to short the coil you are not using by running the positive to the negitive of the same coil. but not...

thanks, i mean mechanically they are fine i have 2 thats why i would like to fix the one.will do some research on adhesives as iv herd some may eat up some plastics. and if you had to what kind of fabric did you have in mind.i do have a roll of gorilla tape which is very strong but maybe i...

i have a directed sx 15 that has a 4 in crack in it was trying to find a recone but with no luck.sub is n great shape other than cone and would really like to repair.if anyone has any info or ideas please let me know havrnt herd these n about 2 years would like to put them to use instead of...

Allright haven't hitting much input which o don't blame anyone people have lives, but I have came up with a box the is 13.5 tall 30 wide and 30 long you can go longer if you need but at this size it gives me 5.8 ft.I want to tune it for 34 Hz and the port I came up with is 12.75 tall 3 in wide...

Yes the box I had herd about was 13 but the opening is 15 max I just wanted to be safe

Yea I didn't word that good and tried deleting but couldn't figure it out but I will be patient.on just ready to get them in a box, I had them in a sealed box for the mean time bit its pretty small bottom of the sub is at the back wall and sounds like they need some breathing room but thanks again

I should be able to fit a box measuring at 13 high 36 wide and 30 deep, might be 36 deep and 30 wide and I know you have to take the latch off but not sure how to design a port ,wanted it at 34hz.