capacitor or not

veloglider
10+ year member

Member
installing a new system and don't know whether or not to install caps or not. Head unit Sony Mex-5Di, front componant speakers CDT-hd 642, rear componants CDT-hd63 both powered by a Rockford Fosgate Punch 600A4 @conservatively 75w @4ohms. Two 12" Soundstream DaVinci subs in a ported box each powered by a Rockford Fosgate punch 800A2 mono @conservatively 900w. so what would you experts suggest, i am using at least 2ga wiring for the install

 
batcap is gonna be better than alumapro. the alumapro's simply cannot charge/discharge fast enough. but if you want to get down to it, a cap in any form is worthless in my oppinion. you are better off fixing the problem rather than putting a band-aid on it. get bigger power wires, a better battery, better alternator, upgrade the big 3, whatever you have to do, but avoid a cap.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The amps are not fused themselves. I am considering using smaller gauge wire for the 200 and 300 watt amps (I believe they only recommend 12 awg...
3
2K
Going all Knu for wiring, lugs, and fuse holders. Been using them for the last serveral vehicles and love their products. Battery terminals...
6
1K

About this thread

veloglider

10+ year member
Member
Thread starter
veloglider
Joined
Location
Coconut Creek, Fl.
Start date
Participants
Who Replied
Replies
2
Views
483
Last reply date
Last reply from
hoss
IMG_1914.jpeg

AnthonyO

    Sep 7, 2024
  • 0
  • 0
IMG_1913.jpeg

AnthonyO

    Sep 7, 2024
  • 0
  • 0

New threads

Top