Need help with Eclipse 5301

tubbie

Junior Member
I recieved an eclipse 5301 from a friend who purchased it off of ebay. It did not come with the power/speaker plug. I am going to solder in wires directly to the connector, but I do not know which is which. If someone has this cd player, please write down all the position of the wires and what each is, I would greatly appreciate it.

 
This is only an idea. See if you can get the plug from eclipse before you go and do that. Or find an eclipse dealer near you to see if you can get the plug.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Damn straight. I had one in a 1 cube ported to 35 Hz iirc. It was not that deep but played everything I liked with authority. They were Kove's...
8
537
Killamat and Siless is the same thing. You don't need the thickest stuff either. You're not competing in any DB drags. The 50 mil will be just...
3
498
At full power, you will be drawing about 450 amps. However, I doubt you will be pushing your system that hard. So, that being said, I would use...
3
491
WANTED Need Help
I definitely always wanted a set ....dual had a set also the XF series I believe ...it had the red aluminum cone with big surrounds ...I've ran...
3
794

About this thread

tubbie

Junior Member
Thread starter
tubbie
Joined
Location
Georgia
Start date
Participants
Who Replied
Replies
2
Views
647
Last reply date
Last reply from
tubbie
IMG_1914.jpeg

AnthonyO

    Sep 7, 2024
  • 0
  • 0
IMG_1913.jpeg

AnthonyO

    Sep 7, 2024
  • 0
  • 0

New threads

Top