Looking for 10" SQ Subs

  • 7
    Participant count
  • Participant list
Adire Koda. You need to account for space behind the sub for the pole vent.

I think the Alpine Type S works for you too.

It's modeled above and he would need the d2 version. Have t modeled the dual 2 but doubt it's too different.

They are nice subs though
 
I think, after looking at everything and mulling it over for a bit, I think I'm just going to bite the bullet and get a pair of the Koda 10's. For the power and space I have, I think they're probably the best fit...and less expensive than the Sundown SD4.
 
I think, after looking at everything and mulling it over for a bit, I think I'm just going to bite the bullet and get a pair of the Koda 10's. For the power and space I have, I think they're probably the best fit...and less expensive than the Sundown SD4.
Alot of good subs out there. I'm sure you'll like the Kodas.
 
Well shoot, now I'm finding conflicting info on the actual mounting depth on the Koda 10. @winkychevelle , could you measure one of yours and tell me if the mounting depth is actually 5 inches or if it's something else? I'd really appreciate it. I'd also be curious to see what 2 of the D2 Koda 10's in 1.4 cf sealed would do versus 2 of the Alpine S-W10D2's in the same enclosure both on 500 watts.
 
Well shoot, now I'm finding conflicting info on the actual mounting depth on the Koda 10. @winkychevelle , could you measure one of yours and tell me if the mounting depth is actually 5 inches or if it's something else? I'd really appreciate it. I'd also be curious to see what 2 of the D2 Koda 10's in 1.4 cf sealed would do versus 2 of the Alpine S-W10D2's in the same enclosure both on 500 watts.
I'm pretty sure it's 5.625inch. the 8 is 5 inch

I'll try and check before leaving for work.

Get the ts parameters from parts express.
When adire added the koda 8 to their site I think the 8 and 10inch box specs got swapped
 
Last edited:
I'm pretty sure it's 5.625inch. the 8 is 5 inch

I'll try and check before leaving for work.

Get the ts parameters from parts express.
When adire added the koda 8 to their site I think the 8 and 10inch box specs got swapped
Dang it. I can make 5 inch mounting depth work. 5.6...not so much. I'll be interested to see what you come up with. I got all excited about an actual SQ sub.
 
Just after I posted my last reply, Adire Audio got back to me. Whoever I was messaging with told me the 10 has a mounting depth of 5" and then a little space is needed for pole venting.

1000005072.jpg
 

Attachments

  • 1000005072.jpg
    1000005072.jpg
    508.4 KB · Views: 17
Last edited:
Just after I posted my last reply, Adire Audio got back to me. Whoever I was messaging with told me the 10 has a mounting depth of 5" and then a little space is needed for pole venting.

View attachment 56236
I'll try and check when I get back home I couldn't do it before work due to some heavy rain. If I have time I'll try and model up those subs but idk if I'll have time
 
Activity
No one is currently typing a reply...

Similar threads

I know i know another one of these dang threads. I sold my 2 12" xv3 sundowns, they hit good and plenty loud but not enough spl for me. Im going...
0
1K
  • Locked
Agreed. For the most part, I've found Kenwood subs to be disappointing.
4
2K
American Bass has been one of the easiest brands to get in the US at prices so low it doesn't make sense to be a dealer shipping them from their...
7
1K
Starting from scratch don't have an amp yet gonna wait till I make a decision on which subs right now I'm just trying to settle on which subs I'm...
5
1K

About this thread

loknload

10+ year member
Member
Thread starter
loknload
Joined
Location
Woodburn, OR
Start date
Participants
Who Replied
Replies
27
Views
2,362
Last reply date
Last reply from
Jimi77
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top