2 xplod 12" Need help!!!

[johnny0813]

I've got one 12" xplod in my truck right now.... i just got another and I'm building a box for them. Should i run stereo or mono..... if mono can i run both of them off of one amp?

Click to read more...

 

[Buck 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[KyleBechtold 5,000+ posts]

you are going to get flamed.. fyi.. if you even know.. what ohm are the vc's? dual or single? what kind of amp(s)?

 

[revrider1 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[DBBOOM 10+ year member]

In to learn.

 

[bigaudiofanati2 10+ year member]

Get rid of them get something better

 

[johnny0813]

the subs are 4 ohm..... but idk realy know much bout anything else..... the amp is old its a sony XM 504X idk if that helps

 

[revrider1 5,000+ posts]

If they are 4ohm and u wanna use them mono ull need a 2ohm stable mono amp. Ur best bet if u wanna use that amp is run em stereo

 

[KyleBechtold 5,000+ posts]

well.. the box you build or buy will be worth more than the subs.. if you want cheap subs that sound decent try infinity reference 1250w subs.. they only need 200-250 to sound good and do great in sealed boxes..

 

[johnny0813]

Default Sony XM-504X 4ch amp

permalink

XM-504X 4/3/2 channel

- 50Wx4 into 4 ohms, 20-20kHz, at 0.04% THD

- 50Wx2 + 130Wx1 into 4 ohms, 20-20kHz, at 0.1% THD

- 70Wx4 into 2 ohms, 20-20kHz, at 0.1% THD

- Adjustable 50 - 200Hz 12dB/Oct HPF/LPF w/defeat

- 40Hz Lo frequency EQ adjustable 0 to +12dB

- Individually adjustable input gain controls

- Independent Left + Right LED level indicators

- High level inputs

- Discrete FET predrivers, Bi-Polar final stage Regulated MOSFET power supply

- Dual mode operation allows stereo & mono drive

- Protection for temp, voltage & current faults

- Balanced input circuit for noise isolation

- Chassis mounted gold plated RCA/screw terminals

- dim:13 1/8 x 2 1/8 x 11

 

[johnny0813]

haha im broke cant afford anything else...... but im prolly gunna get more for this but i thought they sounded alright

 

[IDSkoT 5,000+ posts]

In to learn.

lmao.

 

[ric flair 10+ year member]

haha im broke cant afford anything else...... but im prolly gunna get more for this but i thought they sounded alright

don't listen to the fegs here who flame you, equipment isn't cheap, and it takes a while to put a whole system together. You gotta take it step by step.

 

[johnny0813]

so will this amp run the two 4 ohm subs on mono?

Default Sony XM-504X 4ch amp

permalink

XM-504X 4/3/2 channel

- 50Wx4 into 4 ohms, 20-20kHz, at 0.04% THD

- 50Wx2 + 130Wx1 into 4 ohms, 20-20kHz, at 0.1% THD

- 70Wx4 into 2 ohms, 20-20kHz, at 0.1% THD

- Adjustable 50 - 200Hz 12dB/Oct HPF/LPF w/defeat

- 40Hz Lo frequency EQ adjustable 0 to +12dB

- Individually adjustable input gain controls

- Independent Left + Right LED level indicators

- High level inputs

- Discrete FET predrivers, Bi-Polar final stage Regulated MOSFET power supply

- Dual mode operation allows stereo & mono drive

- Protection for temp, voltage & current faults

- Balanced input circuit for noise isolation

- Chassis mounted gold plated RCA/screw terminals

- dim:13 1/8 x 2 1/8 x 11

 

[revrider1 5,000+ posts]

If u run the channels bridged it will