Amp/Subwoofers Matching Question

  • 2
    Participant count
  • Participant list

sauza311

Junior Member
Hello,

I have a Rockford Fosgate 1051S Power Amp (1050 watt 2 channel) and am currently looking for a pair of 12' subwoofers. Previously, I was running 2 RF Punch HX2 12's with this amp, but because of a buddy who wired my subs wrong a few years back, one of the subs blew. I was wondering if anyone had any recommendations on what subs I should by to get the most out of this amp.

Thanks

 
Hello,I have a Rockford Fosgate 1051S Power Amp (1050 watt 2 channel) and am currently looking for a pair of 12' subwoofers. Previously, I was running 2 RF Punch HX2 12's with this amp, but because of a buddy who wired my subs wrong a few years back, one of the subs blew. I was wondering if anyone had any recommendations on what subs I should by to get the most out of this amp.

Thanks
Idk, 12 foot subs are hard to come by...

j/k lol

There are soooo many subs out there, u want something good, find some that have specs that meet your needs, then throw it up here and see what folks say about them, just be sure to stick with something thats name brand, ie not those kind u find on ebay for like 10 bucks each lol.

 
Thanks for the reply. The more I research, the more I think the newer model of the Punch HX2's might actually fit perfectly. Each sub runs 500 watts RMS or 1000 watts max. The 1051s is a 1050 watt amp. I was looking at some 750 RMS subs but I think they might be too much. What do you think?

 
I'm interested in the RF T1000's. I have also been hearing good things about the RF P3's. The T1's are a little more powerful so I think they might be the good choice...any thoughts?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
138
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
369
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
669
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
483

About this thread

sauza311

Junior Member
Thread starter
sauza311
Joined
Location
Chattanooga, TN
Start date
Participants
Who Replied
Replies
3
Views
501
Last reply date
Last reply from
sauza311
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top