Box Builders.... I Need One Made

NissanKicker
10+ year member

Honda-on-22-Nissan-on-20
I currently have (4) 12" D2 Eclipse SW7200s in my 99 Nissan Sentra GXE. They are facing inside the cab. I hit 145.9 on an AC180. So it's loud, but I don't like sealed.... I'm into ported.

I need a box built for 3 12s ported, or a really BIG box for 2 12s ported.

I measured my trunk and the specs are as follows:

Opening of the trunk: 36" (That's sliding the box straight in - if angling the box up you only have 12" to work with)

High: 16" MAX

Length: 43" (43.5") MAX

Deep: 22"

--------------------------------------

This is the current box I have in the trunk:

Front of the box: 26" Long

Back of the box: 43" Long

Angle from front to the side: 13"

Square side: 13"

... (Which makes it 26" Deep)

Hieght: 14

These are some pictures of what I'm talkin' about:

These (2) are pictures of the angle part of box

http://i214.photobucket.com/albums/cc75/NissanKicker/Photo_121507_010.jpg

http://i214.photobucket.com/albums/cc75/NissanKicker/Photo_121507_011.jpg

These (2) are pictures of the trunk opening:

http://i214.photobucket.com/albums/cc75/NissanKicker/Photo_121507_012.jpg

http://i214.photobucket.com/albums/cc75/NissanKicker/Photo_121507_007.jpg

I'm really hoping that I can get a (3) 12" ported box with these dimensions... But if not, I guess I'll have to go w/ 2 or stick with what I have.

Thanks in advance, and let me know what all can be done.

 
Wow... No one can help me out... I'm not asking for a box design, I'm asking for 1 to be built and I'm gonna pay for it.

.. BUT! If you have a design to show if I like it, that's fine.

 
Well... You know I have 4 12" sealed in a pretty big enclosure. And I was told that this boxes size would be a decent sized 3 12" ported box. ( SynQuest aka Audio Conceptz in Ruston, LA )

 
I would not even try and fit three 12" into there...

an enclosure built to the correct cf3 and tunning

with low enough vent velosity for 2 12" would

blow your mind...

I'll build it depending on your location

(shipping costs)

 
I would not even try and fit three 12" into there...an enclosure built to the correct cf3 and tunning

with low enough vent velosity for 2 12" would

blow your mind...

I'll build it depending on your location

(shipping costs)
Not to thread hijack but Thumpper I shot you a PM last week in regards to your test box--does no reply = not interested?

 
i have a 2002 spec v, how did you fit that box in there? it seems to me like you wouldnt beable to since its so wide...i have a box for 2 12's but the max dimensions i could get is 35Wx14Hx22D...because where the wheel well is only 35W, but towards the rear bumper is wider

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

During my replacement of a factory sub I had my factory plastic enclosure just sitting in the back with my new sub just sitting in it loosely and...
0
1K
The it to a custom air brush guy and tell him what you want. You can always stain, plexiglass windows, and put led lights inside the box. Search...
6
358
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
8
682
i have a 15 already for the lows ita a little over kill for a crew cab but I like it and I was hoping it would sound better and louder than my old...
7
517
I have been attempting to study the true nature of why we tend to tune transmission lines and enclosures in general like we do, the nature of...
0
562

About this thread

NissanKicker

10+ year member
Honda-on-22-Nissan-on-20
Thread starter
NissanKicker
Joined
Location
Ruston/Grambling, LA
Start date
Participants
Who Replied
Replies
14
Views
1,414
Last reply date
Last reply from
SilverSquared
1715380631101.png

Doxquzme

    May 10, 2024
  • 0
  • 0
20240510_180834.jpg

3toneEYZ

    May 10, 2024
  • 0
  • 0

New threads

Top