ZarazuaT
Junior Member
Hello all!! I recently purchased a new Accord and I'm over the stock system in it. I am installing a single type-r 12" srw-122d ran at 4ohm. I was wondering if anyone could design one with cut sheet for me. Just a simple enclosure, since I'm not the best builder lmao.
The subwoofer is an old type-r (pre 2010) 500w RMS running off an old RF R500.1 amp. The max dimensions that my trunk will fit is 16"H x 36"W x 20"D. I will be running 0ga from battery to distribution block, then 4ga from there to the amp. I really want low end, maybe around 34hertz? I listen mostly to rap(future, young thug, drake), if you want to call it that lol. What will the design cost me? If you need any more info, please let me know. Really appreciate it, Thanks.
**updated with new measurements**
The subwoofer is an old type-r (pre 2010) 500w RMS running off an old RF R500.1 amp. The max dimensions that my trunk will fit is 16"H x 36"W x 20"D. I will be running 0ga from battery to distribution block, then 4ga from there to the amp. I really want low end, maybe around 34hertz? I listen mostly to rap(future, young thug, drake), if you want to call it that lol. What will the design cost me? If you need any more info, please let me know. Really appreciate it, Thanks.
**updated with new measurements**
Last edited by a moderator: