Enclosure for a SA 8" V2

  • 5
    Participant count
  • Participant list
How much space do you have to work with? .75 after displacement tuned to 30-35 Hz ported would work perfect. I'd do an aero port.
It's going into a 2001 chevy blazer LT and who designed your enclosure for your 2 sa 8's?

 
It's going into a 2001 chevy blazer LT and who designed your enclosure for your 2 sa 8's?
I got the design a few months back off someone for free. It's not the best box, and has a ton of 45 degree angle turns that are un-unnecessary, but the box/subs sound very good. It will surprise you how much power these sa-8 v2's will take, and how low they can get.

 
I got the design a few months back off someone for free. It's not the best box, and has a ton of 45 degree angle turns that are un-unnecessary, but the box/subs sound very good. It will surprise you how much power these sa-8 v2's will take, and how low they can get.
OH OK BECAUSE RIGHT NOW i HAVE MY SA 8 V2 IN A BOX THAT I HAD MY DD 1508 IN AND JUST ADDED A DOUBLE FRONT BAFFLE AND WIDEN THE SUB HOLE A LIL BIT

 
OH OK BECAUSE RIGHT NOW i HAVE MY SA 8 V2 IN A BOX THAT I HAD MY DD 1508 IN AND JUST ADDED A DOUBLE FRONT BAFFLE AND WIDEN THE SUB HOLE A LIL BIT
message brian at starmountain on here with your working dimesions and he will build you an amazing box //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Home Page

He makes great enclosures for that sub imparticular.

 

---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------

 

Home Page

He makes great enclosures for that sub imparticular.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Could not tell you, but you may want to start by going to crutchfield and get a consensus on the 7 or so replacements they recommend. That average...
1
733
You could try to make the port longer, but there might be other reasons with the box won't extend lower, or even the sub. You'd have to reverse...
3
710
i didn’t get to hear it yet. He’s supposed to install it this weekend.
30
3K

About this thread

ACE74

10+ year member
Senior VIP Member
Thread starter
ACE74
Joined
Location
U.S.
Start date
Participants
Who Replied
Replies
10
Views
1,320
Last reply date
Last reply from
double 07
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top