ACT Audio 10+ year member
ACT AUDIO
Just recently bought this amp from NESPL. Was going to use it for everyday, but need $$$ for other AMP repairs. Pics posted on Tuesday, any questions PM me.
Here's what I got for SPECS:
Description
RMS Power @ 14.4V: 50W x 1 @ 4 Ohm - 3600W x 1 @ 2 Ohm
Details
Key Features
Brand MA Audio
Model HK-4000D
Number of Channels 1
Min Frequency Response 10 Hz
Protection Circuitry Thermal, Overload, Short Circuit
Power Supply Topology MOSFET
Input Voltage 14.4 volts
Variable Gain Control With Variable Gain Control
Signal To Noise Ratio 96 db
Features
Bass Boost With Bass Boost
Fuse Rating 2x25 AMPS
Phase Control With Phase Control
Subsonic Filter With Subsonic Filter
Remote Control With Remote Control
Output Power
Preamp Outputs 1 Pair
Peak Power Output (Watts X Channels) 800 x 1
Power At 2 Ohms (Watts X Channels) 3600 x 1
Minimum Impedance Unbridged 2 Ohms
Crossover
Built-In Crossover With Built-in Crossover
Low-Pass Crossover Min Frequency 50 Hz
Low-Pass Crossover Max Frequency 150 Hz
Low-Pass Slope (dB/Octave) 24 db
Dimensions
Height 2.71 in
Depth 25.86 in
Width 12.4in
Here's what I got for SPECS:
Description
RMS Power @ 14.4V: 50W x 1 @ 4 Ohm - 3600W x 1 @ 2 Ohm
Details
Key Features
Brand MA Audio
Model HK-4000D
Number of Channels 1
Min Frequency Response 10 Hz
Protection Circuitry Thermal, Overload, Short Circuit
Power Supply Topology MOSFET
Input Voltage 14.4 volts
Variable Gain Control With Variable Gain Control
Signal To Noise Ratio 96 db
Features
Bass Boost With Bass Boost
Fuse Rating 2x25 AMPS
Phase Control With Phase Control
Subsonic Filter With Subsonic Filter
Remote Control With Remote Control
Output Power
Preamp Outputs 1 Pair
Peak Power Output (Watts X Channels) 800 x 1
Power At 2 Ohms (Watts X Channels) 3600 x 1
Minimum Impedance Unbridged 2 Ohms
Crossover
Built-In Crossover With Built-in Crossover
Low-Pass Crossover Min Frequency 50 Hz
Low-Pass Crossover Max Frequency 150 Hz
Low-Pass Slope (dB/Octave) 24 db
Dimensions
Height 2.71 in
Depth 25.86 in
Width 12.4in