help ?

jayguy

Junior Member
3
0
la,ca
my Alternator is fine with idle at 14.3v but when i start to play my car stereo brass loud it drops to 12.9v,give a little gas it go up to 13.6v. my lights dim as the brass hits

two 12 inch speakers 1200 rms watts rockford t1

4 6x9 with amp

alpine g320

eletric fan

msd box

160 amp Alternator one wire

march v belt pulleys

 
my Alternator is fine with idle at 14.3v but when i start to play my car stereo brass loud it drops to 12.9v,give a little gas it go up to 13.6v. my lights dim as the brass hitstwo 12 inch speakers 1200 rms watts rockford t1

4 6x9 with amp

alpine g320

eletric fan

msd box

160 amp Alternator one wire

march v belt pulleys
you may need a flux capacitor....

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
500
Turn the volume completely down and operate ot normally. This is to see if it is the built in amplifier that is shutting down. If the radio does...
1
412
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
541
Dammned good speakers. Just pass up the CL series,and you will be pleased with CDT speakers. I still enjoy all mine. Polk MM series and Infinity...
4
575

About this thread

jayguy

Junior Member
Thread starter
jayguy
Joined
Location
la,ca
Start date
Participants
Who Replied
Replies
8
Views
388
Last reply date
Last reply from
jayguy
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top