I was able to snag this amp for a good price, now looking for speaks

[Polar]

XENON Phoenix Gold 800 Watt Power Amplifier

High efficiency (greater than 80%) Class D Operation

Xe.load™: optimized for any impedance load

Xe.tune™: 24dB Linkwitz-Riley subsonic and low pass crossovers

Xe.flow™: variable thermal feedback controlled fans

Tried and true triple Darlington output stage

Buffered RCA full range thru output

Remote Monitoring Display (RMD) port

Low Pass Level control ready (LPL-44)

200W x 4 (4-1 ohm stereo)

400W x 2 (8-2 ohm bridged)

Built-in Crossovers

Optional Remote Voltage Display

Optional Remote Low-Pass Level Control

Variable input sensitivty

0 - 18dB Bass Boost at 45Hz

CEA-2006 Compliant

Dimensions: 22" L x 10.6" W x 2.5" H

This is going in a 2015 Ford fusion. Want to do just the fronts for now. Its the non Sony stock 4 inch screen system. I have 1 blown speaker that is driving me nuts. Ive heard the depth on these doors is not much, Ive never personally pulled the door apart to see, yet. Budget? Lets just say $150 ish for now.

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

XENON Phoenix Gold 800 Watt Power Amplifier

High efficiency (greater than 80%) Class D Operation

Xe.load™: optimized for any impedance load

Xe.tune™: 24dB Linkwitz-Riley subsonic and low pass crossovers

Xe.flow™: variable thermal feedback controlled fans

Tried and true triple Darlington output stage

Buffered RCA full range thru output

Remote Monitoring Display (RMD) port

Low Pass Level control ready (LPL-44)

200W x 4 (4-1 ohm stereo)

400W x 2 (8-2 ohm bridged)

Built-in Crossovers

Optional Remote Voltage Display

Optional Remote Low-Pass Level Control

Variable input sensitivty

0 - 18dB Bass Boost at 45Hz

CEA-2006 Compliant

Dimensions: 22" L x 10.6" W x 2.5" H

This is going in a 2015 Ford fusion. Want to do just the fronts for now. Its the non Sony stock 4 inch screen system. I have 1 blown speaker that is driving me nuts. Ive heard the depth on these doors is not much, Ive never personally pulled the door apart to see, yet. Budget? Lets just say $150 ish for now.

Nice looking amp ..are you using it all for highs front and rear or highs front and sub rear chs

 

[Polar]

just for front mids and highs, I have a sub amp

 

[Papermaker85 5,000+ posts]

200x4 at 4 to 1ohm 400x2 at 8 to 2ohm. i love mine but they are POWER HUNGRY

 

[Louisiana_CRX 5,000+ posts]

just for front mids and highs, I have a sub amp

If it was mine I’d get a set of PG Ti65cs for the front

 

[Papermaker85 5,000+ posts]

If it was mine I’d get a set of PG Ti65cs for the front

The elite mids are nice but the tweeters are BRITE. i like the TI tweeters and elite mids but you can't mix and match. Id go active man. 200x4 is a great start with enough head room to do some serious tuning!

i have the 200.4 on my mids bridge. ******* 8s slam.

 

[Louisiana_CRX 5,000+ posts]

The elite mids are nice but the tweeters are BRITE. i like the TI tweeters and elite mids but you can't mix and match. Id go active man. 200x4 is a great start with enough head room to do some serious tuning!i have the 200.4 on my mids bridge. ******* 8s slam.

I was looking at the budget of $150 ..it would be hard to swing the elites in that budget ..use the front chs on the ti’s and save the rear chs for some good midbass

 

[Flipper245]

Notice the ad says it’s a class d and 80% efficient? Don’t think so!

 

[Papermaker85 5,000+ posts]

I was looking at the budget of $150 ..it would be hard to swing the elites in that budget ..use the front chs on the ti’s and save the rear chs for some good midbass

150 ill sell you some ****** PA mids..

 

[Polar]

I had great luck and sound with PRV mids and tymphany tweets in my last vehicle, 3 way active off a PRS80. I dont have a processor at the moment, going to be running off an LOC until I can swing the tesla head unit for the car.

 

[Papermaker85 5,000+ posts]

I had great luck and sound with PRV mids and tymphany tweets in my last vehicle, 3 way active off a PRS80. I dont have a processor at the moment, going to be running off an LOC until I can swing the tesla head unit for the car.

pvr has NO info. no shorting rig no motor topologies to lower distortion etc.

http://www.bcspeakers.com

 

[Polar]

que?