BLD 25 10+ year member
CarAudio.com Veteran
Idmax 12V3 D2
This is the nicest sub I have ever owned, and I have owned quite a few. Looks nice, plays nice.
pics:
Issues:
I am very honest with my stuff, so here are the only issues. I could have never told you these, and you may never have known.
1. Once when i hooked it up, it went crazy for a few seconds and I turned the car off. I believe two of the wires must have touched on the terminals or something. It has worked perfectly since then.
2. The coil is a little dark. I posted a pic and asked about it over on the ID forum, and I believe it was Eric(the president) that said it was just fine.
3. There is a little rattle when it is pushed. , and I think it is because the removable trim ring and spider ring aren't quite tight enough. i asked Eric at ID, and he said two rings are about $20 shipped. I took this apart, and when I put it back together, the screw holes were a little stripped, so it was hard to get it super tight. I recently tightened them more and it sounds alot better.
I recently tightened the screws even more, and it is almost perfect. I ran it in a sealed box in my hatchback, and it sounded awesome, no issues, and then I ran it in my trunk car with 800w ported with again no issues. Awesome sound.
Again, just trying to be straightforward about everything which is why you see so many references below.
Sold as is of course, but these can be reconed, and the motor is fine. I even put a brand new sticker on the back of the motor.
$180 shipped con-us
This is the nicest sub I have ever owned, and I have owned quite a few. Looks nice, plays nice.
pics:
Issues:
I am very honest with my stuff, so here are the only issues. I could have never told you these, and you may never have known.
1. Once when i hooked it up, it went crazy for a few seconds and I turned the car off. I believe two of the wires must have touched on the terminals or something. It has worked perfectly since then.
2. The coil is a little dark. I posted a pic and asked about it over on the ID forum, and I believe it was Eric(the president) that said it was just fine.
3. There is a little rattle when it is pushed. , and I think it is because the removable trim ring and spider ring aren't quite tight enough. i asked Eric at ID, and he said two rings are about $20 shipped. I took this apart, and when I put it back together, the screw holes were a little stripped, so it was hard to get it super tight. I recently tightened them more and it sounds alot better.
I recently tightened the screws even more, and it is almost perfect. I ran it in a sealed box in my hatchback, and it sounded awesome, no issues, and then I ran it in my trunk car with 800w ported with again no issues. Awesome sound.
Again, just trying to be straightforward about everything which is why you see so many references below.
Sold as is of course, but these can be reconed, and the motor is fine. I even put a brand new sticker on the back of the motor.
$180 shipped con-us