mml 10+ year member
Junior Member
I'll be using 4 - 10" free air subwoofers with approximately 250 watts each.
The drivers will be facing the cargo space, magnet inside the cab.
4 amplifiers mounted on the inside of the cab, not the cargo side as the picture shows (just for reference).
I realize that the partition needs to be sealed between the cargo space and the cab as much as possible.
2 - 3/4 MDF for the baffle.
1 - 3/4" MDF for the amp rack.
Should I secure MDF to upper sections of the partition.
I have some B-quiet Ultimate would this be ideal to apply to both sides of the steel.
Are T-nuts good enough to secure the subwoofers and all MDF to the steel.
Thx.
The drivers will be facing the cargo space, magnet inside the cab.
4 amplifiers mounted on the inside of the cab, not the cargo side as the picture shows (just for reference).
I realize that the partition needs to be sealed between the cargo space and the cab as much as possible.
2 - 3/4 MDF for the baffle.
1 - 3/4" MDF for the amp rack.
Should I secure MDF to upper sections of the partition.
I have some B-quiet Ultimate would this be ideal to apply to both sides of the steel.
Are T-nuts good enough to secure the subwoofers and all MDF to the steel.
Thx.