Spliced wires = high distrotion?
- Thread starter toxicwaste8504
- Start date
- Replies 2
- Views 1K
-
3Participant count
-
Participant list
-
toxicwaste8504
avistar23 10+ year member
www.SoundhertZ.com <---
Ther will be no difference ....
-Mike
-Mike
Activity
No one is currently typing a reply...
Similar threads
If I was in your situation, I would experiment with the wring for a day or two. If that didn't work, I would purchase an external amplifier. Run...
- Started by Expertnewb
- Head Units
I didn't read the article, but with those GM Bose systems; either fix what needs fixing, or rip out the entire thing and start from scratch with...
- Started by Kustamogen
- Wiring, Electrical & Installation
Not really. The basslink already has a hi-low converter built into it.
- Started by Ethan5150
- Wiring, Electrical & Installation
Try placing the subs in the front seat, to see if the issue persists. Just for diagnostic purposes. It may be wiring, but the distortion may be...
- Started by 1994 Ford F150
- Wiring, Electrical & Installation
Your amp 12v+ is usually a thick wire, same thickness as your ground wire.
The remote input is a thin wire that is usually connected to a wire...
- Started by Brian blanton
- Wiring, Electrical & Installation
About this thread
New threads
-
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 11
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 5
-