tuner not working

  • 2
    Participant count
  • Participant list

cpalmer3769

Junior Member
hey guys , thanks in advance for the help. I recently bought a used Alpine CDA-9885 headunit from a buddy. I installed it in my 2001 Pontiac Grand Prix. I know the unit worked before i installed. I have installed dozens of headunits and never ran into this problem. anyways after installing the unit, everything seemed to be working fine except i have no audio when in tuner mode or aux. when in cd mode, it plays nice and clear like it should. in tuner mode i don't even get so much as static. you can hear power to the speakers when i crank it up, but no signal.

I pulled the unit back out to make sure everything was wired correctly and it looks as though it is. The head unit i pulled out of the car before i installed the Alpine was a cheap jvc and i would only receive about 3 or 4 stations and they wouldn't always be clear. most all of the stations were static.

my question is, do you think the problem lies in the unit, or something with the cars antenna system. I feel like i should still get some type of reception with the alpine. not just silence. I am stumped on this one guys and need some help ( its my fiances car and shes going to kill me if i don't fix her radio haha)

 
I haven't had that problem

But you could go get an antenna from best buy for $10, pop the radio out and plug it in, if it works it's the car antenna if not it's probably the radio and just return the antenna

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

There is a Michigan MECA Facebook group that is pretty active. They should be able to point you in the right direction.
3
1K
Im pretty sure that is a Delphi Sirus plug in./Din connector. You may need to contact GM or better Yet, Sirus, and see if they can help you out. I...
1
764
Figured it out. For some reason my rca cables would work in everything but the new head unit. I quickly tried a spare set, and that fixed the problem.
1
803
There isn't much it can be. Pull the amp turn on wire out of the amp, and just run a wire from there and touch the distro block will activate...
6
1K

About this thread

cpalmer3769

Junior Member
Thread starter
cpalmer3769
Joined
Location
dallas,tx
Start date
Participants
Who Replied
Replies
1
Views
1,062
Last reply date
Last reply from
tymoto21
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top