VERY CHEAP - AWESOME DEAL - 480x1@4!!

req
5,000+ posts

am a mod.
16,172
0
Syracuse, NY
just wanted to let anyone know - if you are in the market for a 400~500w amp that will do that power at 4ohms (mono) - then i have the best deal around.

i just went to http://www.thezeb.com - and they had the profile AP1000 for $109 with free shipping. i thought that was a little much, so i shopped around. i found that the same amp at http://www.millionbuy.com was cheaper, but shipping would have gotten it up there - it was like 85+shipping.

so i went back to thezeb, and pricematched to millionbuy. i got an email today telling me they could offer that same amp for $78+shipping - turns out, shipping was SEVEN dollars!!!!!

so i got a 480w amp for $86 total. warantee, brand new in box.

tell me how cool is this. here are links-

thezeb - profile AP1000

http://www.thezeb.com/p-Profile-AP1000-2-Channel-Amplifier-109688.htm

millionbuy - profile AP1000

http://www.millionbuy.com/prfap1000.html

just click the "THEZEB BEST PRICE" button on thezeb page (bottom right i think) and enter the info, takes about a day. great stuff!!! heres the specs for that amp.

PROFILE AP1000 2 CHANNEL

# RMS Output Power (4 Ohms): 160W x 2

# RMS Output Power (2 Ohms): 240W x 2

# Bridged RMS Output Power (4 Ohms): 480W x 1

# MOSFET Power Supply : Yes (Dual)

# Total Harmonic Distortion:

# Signal / Noise Ratio: 103 dB

# High/Low Level Converter (Male RCA): Yes

# Pre-Amp (RCA) Outputs: Yes

# Variable Bass Boost at 45Hz 0-12 dB

# 12dB/Octave Crossover

# (High Pass/Full/Low Pass) HP/Full/LP

# Variable LP Crossover Frequency: 50 - 250 Hz

# Variable HP Crossover Frequency: 80 Hz -1.2 kHz

# Fuses: 2 x 30A

# Dimensions: (2" H x 10 1/4" D) 12 1/2" W

# Power/Speaker Terminal Size (Gauge): 4 / 6



 
Great find, and I bet it does very close to its rated power. Remember you get what you pay for. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Profiles do nearly dead on with power. I saw one bench tested a year or so ago and it was off by like 3 watts or something. That is an excellent deal, nice find Req

 
Also look at the HA1000 at zeb.com. $79.99

Same power just THD

It adds a subsonic filter adj from 20-50Hz.

Great for ported applications. It's keeping my little S8L7 loud and clear.

 
well. if you really want to, you can paypal me the money and i can ship it overseas //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

but it would cost about 10 million dollars //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 
Nice find!

I've installed an AP400 and AP1200 in a friends car and they seem to be working out pretty good. Powering a set of Crystal Comps and a Dayton Titanic MKIII 15.

Board pic of AP1200 (600x1@4) I imagine the AP1000 will look similar:

ProfileAP1200Internals.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It's always leaned that direction. Not sure how cheap you can really get anything done these days. Deadening and custom mounting...
10
1K
Did you try the red on both sides, then the white on both sides. It may be a bad cable.
11
2K
"I don't have any crossovers" You'll need one to filter out the low frequencies leading to your sub woofer. They'll produce no sound then...
14
2K

About this thread

req

5,000+ posts
am a mod.
Thread starter
req
Joined
Location
Syracuse, NY
Start date
Participants
Who Replied
Replies
30
Views
2,590
Last reply date
Last reply from
Nukedsodapop
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top