OnixxFred
CarAudio.com Newbie
I have a Pioneer - GM-Series 2000 W Max Power 5-Ch. Class-D Amplifier.
75 W x 4-Channel
200 W x 2-Channel
350 W x 1-Channel
4 Ohm Bridged / 100 W x 4-Channel
350 W x 1-Channel - 4 Ohm
600 W x 1-Channel - 2 Ohm
As you can see, this amp operates at 4 or 2 ohm loads. I have 2 Punch P2D4-8 but I can't wire them for a 2 Ohm load, Fosgate confirmed this with me. I also have 1 10" Skar VD-10 D4 dual 4-ohm sub. A total of 3 Subs. Now I know it isn't wise running mixmatches subs but I want to! My question is because this amp operates at 2 or 4 ohm, can it operate seeing a 2.67 ohm load without any issues? I can't seem to get an answer consistently yes or no! The folks at Fosgate said No it's either 2 or 4. Crutchfield said no problem, as long as I don't drop below 2 ohms or go over 4 It would be fine. If I can't run the 3 off this one amp I have a second mono amp I can add. If my Punch 8" subs could be wired for 2 ohm load this would be great but I don't think it's possible with this series of subs. There is a lot I don't understand about this stuff but I love learning so please feel free to chime in. On, my vehicle is a 2010 Toyota Tundra with a 13.1 Dasaiti Android unit, it's really cool! I recently built two cabinets, see my video.