Jim Trucks
CarAudio.com Newbie
What is current draw for Punch 60IX with trigger on and no signal input?...Thanks, Jim
The manual states nothing about idle current. Or it is somewhere in one of the paragraphs.What is current draw for Punch 60IX with trigger on and no signal input?...Thanks, Jim
Thanks for the quick response. JimThe manual states nothing about idle current. Or it is somewhere in one of the paragraphs.
It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.I think around 1.8 - 2.2 amps so Negligible, why?
4 amps is high. Not an issue if you normally do not listen for hours while puttering around.Thanks for the quick response. Jim
It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.
Class A/B, right? If I recall, these little 2x30 watt jems could best several hundred watts, mono. One of RF's endearing qualities on most of their equipment, you always knew you were getting more than you paid for.Thanks for the quick response. Jim
It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.