FEATURED Hyundai Cilantro.. I mean Elantra!

As you may know, I blew up a Punch 500x2 amp. Not sure how I did it but I did. I thought about it and for similar money I can buy another Punch 500x2 and a Down4Sound JP13 and have my full active setup.

Punch 400x4 - (50w x 4 @ 4ohms) mids and tweeters
Punch 500x2 - (150 x 2 @ 4ohms) midbass
D4S JP13 - ("1300"w x 1 @ 1ohm) subwoofers (OldSchoolStereo Dyno Certified @ 1 ohm 2057w @ 13.72v, Dynamic 2603w @ 13.63v)

I think we all know what my dumb ass is about to do lol. Which should I get first? The JP or the RF?
I wouldnt do either. Id snagg a CT Sounds 2k and the 150.4 myself. Thats me though 😁 or look at some DeafBonce amps
 

I was gonna do 2 of these for the 3 way in my delta but my midbass are 2 ohms 😂

For now I'm gonna run a rf power t400-4 I have collecting dust and an arc audio FD 2200 that woofersetc has for $139
 
Last edited:

I was gonna do 2 of these for the 3 way in my delta but my midbass are 2 ohms 😂

For now I'm gonna rf power t400-4 I have collecting dust and an arc audio FD 2200 that woofersetc has for $139
Nbc Nodding GIF by Law & Order
 
The jp monoblocks are pretty stout. The few jp 4 channels I've heard were noisy from just noticeable to that blows 😂
I have the 4 channel covered with my RF Punch 400x4... or my soundstream 4 channel if I really wanted too. I think I will be happy with the two RF's, they are matching amps, have all the connections on the bottom edge and have the C.L.E.A.N. setup for the gains. It's what I built the amp board for originally plus the DSP so it will still look good.
 
But I am already halfway there... the JP13 is on THE way.
You could of got a little more power on tap for the coin$?? on that sub stage. But id recommend the CT sounds 150.4 or this D.bonce 4ch. Both do very nice for the $



we all can make recommendations all day long, but its your vehicle, your system, and your funds in the end. 😁 ✌️
 
You could of got a little more power on tap for the coin$?? on that sub stage. But id recommend the CT sounds 150.4 or this D.bonce 4ch. Both do very nice for the $



we all can make recommendations all day long, but its your vehicle, your system, and your funds in the end. 😁 ✌️
I already have two 4 channel amps. Oh, and I want class A/B for the mids and highs.
 
Last edited:
I already have two 4 channel amps.
Gotcha. I misunderstood then/ didnt read it correctly

"As you may know, I blew up a Punch 500x2 amp. Not sure how I did it but I did. I thought about it and for similar money I can buy another Punch 500x2 and a Down4Sound JP13 and have my full active setup.

Punch 400x4 - (50w x 4 @ 4ohms) mids and tweeters
Punch 500x2 - (150 x 2 @ 4ohms) midbass
D4S JP13 - ("1300"w x 1 @ 1ohm) subwoofers (OldSchoolStereo Dyno Certified @ 1 ohm 2057w @ 13.72v, Dynamic 2603w @ 13.63v)"

Just A couple of recommendations


 
Activity
No one is currently typing a reply...

Similar threads

These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
872
Is there a BT, USB or other AUX option? May be time to convert your CDs to a solid sate option and use it until you replace the init altogether.
2
743
This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
909
Fully test it without the ACR-1. TBH it sounds like an amplifier issue. Try connecting your phone direct to the amp via a 3.5mm to RCA cable. If...
2
843
I would make a call, or send like Crutchfield or Sonic Electronix an Email or even Chat with them and see if they can help you get the correct...
12
2K

About this thread

ThxOne

Premium Member
The Boss
Thread starter
ThxOne
Joined
Location
The United States of America
Start date
Participants
Who Replied
Replies
804
Views
94,846
Last reply date
Last reply from
audiobaun
1720028768245.png

BassErex

    Jul 3, 2024
  • 0
  • 0
1720028493714.png

BassErex

    Jul 3, 2024
  • 0
  • 0

New threads

Top