Any recommendations for a 5 channel amp that has a 4 ohm f/r and 4 ohm sub channels. I’d like the sub channel to be 500 watts rms at least. I’m looking at the JL HD900/5, but the price is astronomical!
I have two kicker compR12’s dvc 4 ohm, they’re rated at 1000 peak 500 rms wouldn’t 700 rms fry them?Crescendo Audio Symphony S6 6 CHANNEL AMPLIFIER
Shop Crescendo Audio Symphony S6 6 CHANNEL AMPLIFIER at the Guaranteed lowest allowed price of 499.99 with 20+ yrs of the best customer service, only at the SSA STOREstore.soundsolutionsaudio.com
I'm running one of these pushing components up front and coaxials in the rear with channels 5 & 6 bridged to my front sub. I've got zero complaints about it and I've ran it hard for a good bit now.
Bridging channels 5 & 6 will give 700w @ 4 ohm to your sub
Nope, unless you set the gain too high for input signal. They won't see 700w consistently unless you're playing test tones. Music is dynamic and you'd be surprised how little power a sub sees most of the time. 700w would give a little dynamic headroomI have two kicker compR12’s dvc 4 ohm, they’re rated at 1000 peak 500 rms wouldn’t 700 rms fry them?
Ohhh okay, that makes sense. So that amp you suggested would run two components at 4 ohms and two coaxials at 4 ohms and my two kicker 12s at 4 ohms with no sweat? Any suggestions on a quality speaker set?Nope, unless you set the gain too high for input signal. They won't see 700w consistently unless you're playing test tones. Music is dynamic and you'd be surprised how little power a sub sees most of the time. 700w would give a little dynamic headroom
You wouldn't hear the difference in a car environmentI know I could wire impedance down, that would open my options up. But I’ve been told the quality of the bass sounds better when the subs are wired at a higher impedance.
#What Vehicle?Ohhh okay, that makes sense. So that amp you suggested would run two components at 4 ohms and two coaxials at 4 ohms and my two kicker 12s at 4 ohms with no sweat? Any suggestions on a quality speaker set?
2008 Honda accord coupe#What Vehicle?
RearsPolk MM6502 6.5" Front Component and Rear MM652 6.5" Coax Speaker System Bundle Includes 2 Pair
This bundle contains a pair of Polk MM6502 6.5" Component Speakers, and a pair of Polk MM652 6.5" Coaxial Speakers with Ultra Marine Certification Polk MM65...creativeaudio.net
fronts
Just remembered, I have that same coaxial/comp set, BNIB, $245 shipped if you are interested. I have the matching coaxials, took these of the components. This was going to go into my brothers restomod build, engine is so loud, had to go with pro-style drivers (unfortunately).And currently on sale:
XSP65KIT 600W Peak (200W RMS) 6.5" X-Series 2-Way Component Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters
Product Details: 6-1/2" NVX X-Series 2-way Component System Car Speakers Power Handling: Peak: 600 watts per set / 300 watts on each side RMS: 200 watts per set / 100 watts on each side Carbon Fiber cone material Rubber speaker surround 1" Silk Dome Tweeters CEA-2031 compliant 1-3/16" Voice coil...nvx.com
XSP652 600W Peak (200W) RMS 6.5" X-Series 2-Way Coaxial Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters
Product Details: 6-1/2" NVX X-Series 2-way Coaxial Car Speakers Power Handling: Peak: 600 watts per pair / 300 watts each RMS: 200 watts per pair / 100 watts each Lightweight Carbon Fiber cone Rubber speaker surround 1" Silk Dome German-made tweeters CEA-2031 compliant 1-3/16" Voice coil Woven...nvx.com