Blackout67
CarAudio.com Regular
Have a friend who just got done putting in his altnernator from Autotech in his 05 Focus. He has the smaller belt on there that fits good, 0 gauge power and ground wires and the alternator is in there fine. The harness from Autotech had a yellow wire and a blue wire and the instructions say to use the yellow wire to tap into an ingition source and the blue wire Ig is for the PCM to monitor the voltage level (not too familiar with focuses) and goes to the alternator post. We did all that but the car will not turn over. The dash lights would come on but it wouldnt even click with the key turned. The stock power wire going to the fuse box along with the rest of the stock wires.
My Autotech Alternator was plug and play in my 03 mustang with no issues although from my understanding, the car should still be starting even without the alternator or am I just retarted? I'm not there now I had to go to work but is there anything we might've missed that I can give him directions on?
My Autotech Alternator was plug and play in my 03 mustang with no issues although from my understanding, the car should still be starting even without the alternator or am I just retarted? I'm not there now I had to go to work but is there anything we might've missed that I can give him directions on?