idk man most prefab ported boxes sub.. i found decent ones on ebay but they like $160 shipped i got mine without carpet with double front baffle, rounded port end (pic in avatar)I was thinking of getting this box
SINGLE PORTED 12"
I looked at it and the best I could come up with will be 2ft3 ad and a 29.5hz tune... thats LOW... I owned 2 of those and tuned to 31.5hz they went low well... that 29.5hz tune WILL cause you to lose some output but will slam pretty good... you like decaf?.. that lower tune will make you smile with that sub if you give it clean power... in that box a nice 1200 watt amp will yield around 1000 watts and its ported for that.I was thinking of getting this box
SINGLE PORTED 12"
I looked at it and the best I could come up with will be 2ft3 ad and a 29.5hz tune... thats LOW... I owned 2 of those and tuned to 31.5hz they went low well... that 29.5hz tune WILL cause you to lose some output but will slam pretty good... you like decaf?.. that lower tune will make you smile with that sub if you give it clean power... in that box a nice 1200 watt amp will yield around 1000 watts and its ported for that.
Honestly... build a 2.25ft3 box tuned to 31hz ported for your power and configured for your vehicle... its not that hard to diy a box if you let people help and try.So what do you think about the set up I’m thinking of gettingEVL 12”
JL Audio jx 1000/1
Fox box
Knuconcept 4 gauge
Arc audio 600/4 xdi
Existing speakers polk 6 1/2 and 6x9
97 Honda civic
Problem is my local guy charges me $300 at least just to build a boxHonestly... build a 2.25ft3 box tuned to 31hz ported for your power and configured for your vehicle... its not that hard to diy a box if you let people help and try.
That $300 may well be the most well spent expense you incur for the entire system... lol... a well built and tuned/properly configured enclosure is so important that I can't stress the importance enough... if you'd audition a system thats done correctly the result is obvious to anyone... a fox box may be easy and adequate but its not optimumProblem is my local guy charges me $300 at least just to build a box And I’m no good for making boxes
I agree with shredder2. Idk if the OP is gonna listen though, seems like he has his mind set on what he originally picked out is why I said the prefab box would be fine but its def not Ideal lol.That $300 may well be the most well spent expense you incur for the entire system... lol... a well built and tuned/properly configured enclosure is so important that I can't stress the importance enough... if you'd audition a system thats done correctly the result is obvious to anyone... a fox box may be easy and adequate but its not optimum