OK. Im new here but not so new to car audio. I currently have a 2000 pontiac grand prix with a Diamond D3 12" sub powerd with a JBL BP600.1 . Very shortly i will either be purchasing a Jeep Liberty or a Ford Explorer and want to add one or 2 more subs. I will be doing a fiberglass box. Just wanted to kno if i could run 3 12s on that amp. I kno its an old amp but it still gets the job done.
shaneb 10+ year member
CarAudio.com Veteran
you will have a funky ohm load but prob can.
whats the output ratings on the amp?
whats the output ratings on the amp?
your going to need more amp. you can add as much as your little heart desires as long as you can meet the demand of what's needed.
- Thread Starter
- #4
its 600watts at 2ohms, but the amp is stable down to one. and thanks for the quick responses. Any sugestions for an amp? If it easier i can just do 2 of them and design the box a little different
AllDayMJ 10+ year member
VR4 power.
it might be able to wire to 1.3ohms if its the right coil config
Activity
No one is currently typing a reply...
