95 Accord, Team Ascendant Audio 18

i hope i can do 150 when i get a new alt. right now it sounds about the same

 
Last edited by a moderator:

1002918ua.jpg


1002917.jpg


1002919v.jpg


 
Last edited by a moderator:
This is nice man. I like the work you put in, especially the way the amps are mounted/displayed. You see any heat issues with those?
The 100.4 gets a little warm and when I just had 1 1500 at .5 ohms it got really hot but only went into thermal protect once. now both 1500s stay fairly cool

 
The 100.4 gets a little warm and when I just had 1 1500 at .5 ohms it got really hot but only went into thermal protect once. now both 1500s stay fairly cool
Yeah the AB amps do get a bit warm anyway. You just don't have too much airflow around those amps so that's why I was wondering. But glad it's working out for ya! It looks good.

 
Got metered again today and here are the results

33hz tone at the headrest with driver's door open

1002215z.jpg


33hz tone at the headrest both with driver's side front door and rear door open and trunk open

1002216o.jpg


33hz tone at the headrest both driver's side front door and rear door open & passenger side door braced and trunk open

1002217xm.jpg


33hz tone on the dash with both driver's side front door and rear door open and trunk open

1002218o.jpg


33hz tone sealed on the dash

1002219p.jpg


33hz tone in the kick with both driver's side front door and rear door open and trunk open & passenger side door braced and trunk open

1002222c.jpg


On music at the head rest both driver's side front door and rear door open and trunk open

1002224dy.jpg


music at the head rest with both driver's side front door and rear door open and trunk open

1002225c.jpg


 
Last edited by a moderator:
Right now I have an AQ 2.5 15" in my Accord. 3.5 cube at 32 hz. I went against what I was told and Im not exactly happy.

After trimming and all that to make my box fit (I had another guy help me and used two crowbars to squeeze it in) Im wondering if sub and port forward would me an improvment for me, since thats all Iv saw on this thread, vs the sub and port back that Im running now.

My last setup in this car was 2 12s in a sealed box. Firing forward wasnt near as loud as firing backwards, which was no different than firing up, so I put this box in the same way. Being much larger, its a pain to move around. If you guys think it would be worth my time, Ill spin it around as soon as I can. I just hate to waste 30 mins spinning it, only to have to put it back to the orignal way.

Sorry for the derail! Just trying to get some other Accord guys openions.

Flush mount is nothing shy of amazing. Beautiful work sir!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah if you want to be loud and don't mind losing the back seat start looking into building a wall. B pillar wall. Gives you lots of room for...
6
896
I don't know, maybe two 12's and two 15s on a IB wall maybe? Lol!
2
790
I don't think OP is going to do the deadener themself, but these are my tools for it. If its 80 degrees out, you can just leave it out and it's...
7
3K
Based on the age of your system, it may be a good idea to look for a new aftermarket unit.
4
1K

About this thread

basshead7890

10+ year member
CarAudio.com Elite
Thread starter
basshead7890
Joined
Location
Al
Start date
Participants
Who Replied
Replies
267
Views
94,443
Last reply date
Last reply from
basshead7890
Screenshot_20240518-030709~2.png

1aespinoza

    May 18, 2024
  • 0
  • 0
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top