Box build for Eric

Mike465
10+ year member

Ami Creations
2,858
0
Kennesaw, GA
Ok everyone this box is for Eric's two Lanzar OPTI1533D 15's

Box is 5.0 cubic feet after displacement with 55 square inches for port tuned to 35Hz.

IMG_0187.jpg


IMG_0188.jpg


IMG_0189.jpg


IMG_0190.jpg


IMG_0191.jpg


IMG_0192.jpg


IMG_0193.jpg


IMG_0194.jpg


IMG_0195.jpg


 
Last edited by a moderator:
Nice subs! Small box though, hm...
Subs require between 2.0-3.0 cubic feet each. So the box is right in the middle. Not every 15 requires a 4 cubic foot box. Look at the DB Drive K9's for example.

That is just a tad bigger than my box for a single 15", way too small. Craftsmanship is A+ though.
Box is perfect size for those subs. Any larger of an enclosure and it would not fit in his car.

Thank you sir!

That's a small box.
That's what she said. LOL

You never know... Sometimes tiny boxes can be very loud.
Exactly. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Pair of 15's with no internal bracing? GL with that one.
Guess i will be waiting by the phone for when he calls and tells me the box blew apart. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 
lol at all the guys talking **** that dont know **** about boxes.
looks good, im curious to see how it performs.
I know alot of "****" about boxes just not the subs he is using. 90% of 15" subs require at least 3 cuft which is why some of us say the box is small.

 
I know alot of "****" about boxes just not the subs he is using. 90% of 15" subs require at least 3 cuft which is why some of us say the box is small.
That is true, but these subs like smaller enclosures

So, 11 sq in of port per cube is enough as well?

This box is going into a trunk car. This is the largest port that we could fit.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
The tricky bit is that they're soft and floppy and they may be stretched a tad to go over the frames. I've used them in the past and come out...
6
2K
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Thanks everyone for the feedback. I got scared of the 4th being to much for a newbie but did end up building a box to 2.1 Cubic Foot tuned to...
7
2K
Love this sub, hate AB's site, short on info for sure. American Bass XR-10D2 box recomend: If you want to tune a 2.75 Cu Ft box (for two of these...
11
3K

About this thread

Mike465

10+ year member
Ami Creations
Thread starter
Mike465
Joined
Location
Kennesaw, GA
Start date
Participants
Who Replied
Replies
18
Views
1,784
Last reply date
Last reply from
Mike465
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top