box design ('98 bravada/15" juggernaut/2Kw+)

[k_schutte 10+ year member]

hoping for something a little different but I don't know if there is room. I can do a standard slot port or aero port myself so I don't want to pay for that LOL... but if there is better box design that will fit in that area and get louder than a slot/aero port let me know whats up... I am planning to make the port interchangable, somethign around 32hz for daily and 40hz for SPL...

My demensions are:

38" wide

32" deep

16.5" tall

setup:

250A alt (100a~ at idle)

Big 3 in 1/0

15" MMATS Juggernaut D1.4 coils (wired to .7ohm)

Fusion NV-AM25001D

probably toss in a battery at some point as well....

Click to read more...

 

[k_schutte 10+ year member]

BUMP!!! c'mon people!!

How the hell do you make interchangeable ports work? If I do the box 16.5" tall, 26" wide, 30" deep tuned to 33hz~ via an 8x8x24 port that would give me 64in.sq. port area and 4.5ft^3 net box area. However If I then do the SPL port 8x8x10 to get me the 40hz~ tuning frequency I want the air space goes up to like 5.2ft^3.... I have never done a box like this and could REALLY use some help!!

 

[k_schutte 10+ year member]

BUMP

because I KNOW I have seen people with interchangeable ports on here...

 

[MmatsDude 10+ year member]

nice sub.. they sound really good on 36 hz for daily, i was actually surprise how low it got for that tunning.

 

[S.B.C. 10+ year member]

4th order?

 

[k_schutte 10+ year member]

I considered that but I have NO clue how ot go about that and I don't think I could fit a 4th order in the area I am wanting to use. This is my a daily driver and I want to keep the box below the rear seat line and not take up my ENTIRE cargo area