First big build score

MjiHFlP
test pic....this is my dash. A galaxy tab4 i fabricated into the dash, and moved the stereo to where the HVAC controls used to be.
 
https://imgur.com/4bc9zAG

 

---------- Post added at 07:08 PM ---------- Previous post was at 07:08 PM ----------

 

https://imgur.com/Q4nZVQZ

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:08 PM ----------

 

https://imgur.com/D7yY4R8

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/n1V7dis

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/ABI4aA9

 

---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/EzIt1AX

 
that works for now, but what you want to do in the future is right click the image, open in new tab, and then copy that url

 
that works for now, but what you want to do in the future is right click the image, open in new tab, and then copy that url
Thanks....theres already alot i want to change. Learned alot from this build.

 
Not a bad idea. I was thinking of installing birch on the roof and spray foam inbetween that and the sunroof.
You can get really thick deader for your lower layer they are measured in mils..I know they can be thicker but 85 mil is fairly thick stuff ..I’ve always used heat guns and rollers to apply mine ..just make sure all surfaces are cleaned well before applying

 
https://imgur.com/4bc9zAG 

---------- Post added at 07:08 PM ---------- Previous post was at 07:08 PM ----------

 

https://imgur.com/Q4nZVQZ

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:08 PM ----------

 

https://imgur.com/D7yY4R8

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/n1V7dis

 

---------- Post added at 07:09 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/ABI4aA9

 

---------- Post added at 07:10 PM ---------- Previous post was at 07:09 PM ----------

 

https://imgur.com/EzIt1AX
Nice looking Rockford Fosgate amp collection.

 
I'd like to get rid of the 360.3 also and get the DSR-1 so i can control it from the tablet. I also don't like how you can't set it below 20hz. With my box tuned to 33.5hz i would like to set the bandpass filter at 17hz but, can't. It also emits a barely noticable hiss noise at all times along with a squeal for a second or two when first turning it on when it's below freezing.

 
I'd like to get rid of the 360.3 also and get the DSR-1 so i can control it from the tablet. I also don't like how you can't set it below 20hz. With my box tuned to 33.5hz i would like to set the bandpass filter at 17hz but, can't. It also emits a barely noticable hiss noise at all times along with a squeal for a second or two when first turning it on when it's below freezing.
I was looking at your pics all looks good ..I also saw you have experience with dampening when I saw your door panels so you should already know what to do with your roof area ..with applying it

 
I was looking at your pics all looks good ..I also saw you have experience with dampening when I saw your door panels so you should already know what to do with your roof area ..with applying it
Yes...and thanks. I think i'll go with applying birch and filling with spray foam tho. With the sunroof mechanism it would be the easiest way to go i believe. Even though it's going to get all in the sunroof and be unusable after that. I don't care. I've owned this car 17 years and have used the sunroof twice maybe.

 
Yes...and thanks. I think i'll go with applying birch and filling with spray foam tho. With the sunroof mechanism it would be the easiest way to go i believe. Even though it's going to get all in the sunroof and be unusable after that. I don't care. I've owned this car 17 years and have used the sunroof twice maybe.
That should work just fine as well and if it’s easiest try it and hopefully have those numbers improve at the next comp ...do you have a meter so you can calculate any improvements ?

 
That should work just fine as well and if it’s easiest try it and hopefully have those numbers improve at the next comp ...do you have a meter so you can calculate any improvements ?
No i don't and i didn't go to a comp. I just met up with a local guy that has an SSA meter. This is a musical build...i just wanted to satisfy my curiosity basically. Had a loose goal to be in the 150db club. Not all that interested in competing. I would have done a driver's side port if i wanted to compete.

 
No i don't and i didn't go to a comp. I just met up with a local guy that has an SSA meter. This is a musical build...i just wanted to satisfy my curiosity basically. Had a loose goal to be in the 150db club. Not all that interested in competing. I would have done a driver's side port if i wanted to compete.
Nothing wrong with that ...that’s what I did with my Mustang when I was in between builds ..I had everything pulled out and heard about a show and was curious if I could break a 150 with a single 12 in the trunk ..I threw everything together 2 days before a show test tuned it on the way there and did a 151.9 at the time it was the loudest show recorded trunk car ..nowadays they are doing way above that ..I’m running two 8s in the car and just a basic daily build now ..

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
Wow, kinda baffled here. Once you get the tune right. You don’t need to mess with it. However, A bad tune you will. You may have different type...
16
1K
I will still find the blame..Bad tool, cheap connectors, junk wire..LOL 🤣 🤣 I didnt have enough B12 this morning is my favorite
23
3K

About this thread

nismotwin

10+ year member
Senior VIP Member
Thread starter
nismotwin
Joined
Location
virginia
Start date
Participants
Who Replied
Replies
36
Views
1,974
Last reply date
Last reply from
nismotwin
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top