Paarthurnax
Junior Member
I recently bought two 12" Kicker CompR subwoofers, along with a Kicker CX 1200.1 Class D Monoblock amp.
Here's the link for the subs: CompR | KICKER
Here's the link for the amp: CX Amplifiers | KICKER
The subs themselves have an impedance switch on the bottom, which can be set to either 1 ohm or 4 ohms. I was just curious as to what you would recommend to set it to. I want the most bass I can get out of them, but I also didn't know if I set it to the wrong impedance if it might damage the sub/amp. Thank you!
Here's the link for the subs: CompR | KICKER
Here's the link for the amp: CX Amplifiers | KICKER
The subs themselves have an impedance switch on the bottom, which can be set to either 1 ohm or 4 ohms. I was just curious as to what you would recommend to set it to. I want the most bass I can get out of them, but I also didn't know if I set it to the wrong impedance if it might damage the sub/amp. Thank you!