LOC in a Lexus es300

hm i thought i could just tap into the wires behind the headunit before they are amplified? if i tap into them after the amp wouldnt that sound horrible due to the signal already being amplified?

 
hm i thought i could just tap into the wires behind the headunit before they are amplified? if i tap into them after the amp wouldnt that sound horrible due to the signal already being amplified?
if you tap in before the amp you will have barely any signal, even with the gain completely maxed.

.....but do what you like.

 
got it to work. thanks guys

Right Front Speakers (+) Light Green

Right Front Speakers (-) Blue

Left Front Speakers (+) Pink

Left Front Speakers (-) Purple

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
493
Yeah tapping off the 4 gauge is typically fine. However, you need to fuse the smaller wire right by the 4 gauge at 1 amp (or whatever the small...
3
904
Thanks for the link to this video, I've seen this one before but it's not for component speakers which is what I'm going to install and the part...
4
828
You should run all exact matching subwoofers in one singular enclosure and 1 amp or matching amps for the best listening experience for the space...
11
2K
There are a couple that SMD has tested, around $20.00 that should take the wattage from most any HU. If you are tapping into the speaker wires...
3
1K

About this thread

bassak47

10+ year member
Member
Thread starter
bassak47
Joined
Location
Chicago, IL
Start date
Participants
Who Replied
Replies
12
Views
2,780
Last reply date
Last reply from
bassak47
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top