Need an amp

Do you want to stay with Fosgate equipment? If you do and would also like an O/S amp; looking into the Power 500.2, 1000a2, & 1100a2 on ebay or other car audio classifieds. Those 3 amps I mentioned are monsters.

 
ok almost have a choice made, its between a audiopipe 15001d for $150 or jbl gto 1200.1 for $250? id like to go with a rockford fosgate amp but i cant find any in my price range and the money would be better spent on upgrading my wiring and alternator etc.

on second thought i could still fit an audiopipe ap3000.1 into my budget and upgrade wiring.. so i guess its between 3 amps now lol

 
I know most people are not fond of Audiobahn amps...But I have some really brute Baddass amps in the classifieds for 250.00,and i will wave the shipping??HCT 4x125,and the 18001.Will push just about whatever you want..???Up for grabbs..Thanks

 
so probably a newbie question but all of these amps (between 4 now) are all rated at XXXwatts X1 @ 1 or 2 ohms... now im almost positive i can run my subs at 1 ohm my question is the "X1" part.. does that mean into 1 sub? if so should i be dividing that in half because i have 2 subs or will that rms wattage be going to each sub?

 
that means into 1 channel. and yes in half because of 2 subs. my jbl is a nice korean made amp i believe and is better quality then the new audiopipe by a long shot. this amp has nice sq a high damping factor and is underatted. it is 1200 rated and does about 1500 rms. PM me and lets get you a nice new amp man //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This may be an option for you as well. Im sure Amazon has them on theyre site also to be purchased. Great amps...
11
584
While we're speculating, why not bump up your volume gain (no pun intended) for just a few dollars more (literally) and go with the 8" versions of...
5
955
* The fuse at the start of the cable needs to be equal to or greater than the fuse/load at the end of the run. * The cable needs to be capable of...
4
2K
Thank you for your reply. What if I wire in series for 8 ohm load ? Sorry for my newbie questions, but wouldn't it have better sound quality...
3
1K

About this thread

aemeth

10+ year member
Junior Member
Thread starter
aemeth
Joined
Location
NW WI
Start date
Participants
Who Replied
Replies
10
Views
793
Last reply date
Last reply from
basscort2009
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top