schrummy 10+ year member
CarAudio.com Elite
1. Product:
DC 12k
2. Specs:
Key Features
• .5 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• 2 channel
• Triple 0 awg power and ground inputs
We recommend for installation
• 1 upgraded battery under the hood
• 3 extra 800ci battery in the rear
• Minimum of two 0 awg ran from the front battery to the rear batterys
• All 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 6 runs into the amp
• 2 upgraded aftermarket alternators
• Dash mounted voltage meter
Features Voltage 12.0K
Output Power (RMS) 4 ohm 14.4V 1,200W x 2
2 ohm 2,100W x 2
1 ohm 3,400W x 2
.5 ohm 12V 4,200W x 2
.5 ohm 14.4V 5,500W x 2
.5 ohm 16V 6,500W x 2
Working Voltage 8.5V~16V
Frequency Response Hz (-3dB) Hz 20~250
Signal to Noise Ratio dB 100
Damping factor 250
Efficiency @ 4ohm % 85%
Low Level Input V 6V - 0.2mV
Line Output Yes
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Bass Boost
( @45Hz ) Switchable
Variable dB 0 ~ 9
Subsonic Filter Switchable
( @ 24dB slope ) Variable Hz 10~50
Remote Level Control Yes
Double Sided board 2 oz
3 oz Yes
Indicator Power Yes
Protection Yes
Speaker & Power terminal Mold Type Yes
Power Gauge 0Ga x 3
Fuses External Yes
Heatsink Length mm (inch) 850(33.46)
3. Description/Condition:
Cosmetic:
i would rate the amp 8/10. Minor face scratches, but scratches on the mounting feet, and underbelly of the amp.
Mechanically:
the amp does turn on, however somewhere on the signal processing side of the amp, there is a broken solder connection (see pics). There are no burnt components on this amp. I just do not have the knowledge to fix this amp my self, nor do i have the time to send that amp to DBr.
4. Price: :
I see these go used in working order for around 1700 shipped.... since mine doesnt work, i will price mine under the assumption that it would need a new board (i guess $600 for all repairs and shipping, shouldn't even be close to that)
that puts me at $1100 for the amp, however, i will also take $150 off due to the new owner having to either repair the amp, or sending it in to get fixed.
So i will sale the amp at $950 shipped... OBO
any questions or concerns, please do not hesitate to send me a text (712) 660-0703. I will answer back as soon as i can.
5. Pictures:
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
DC 12k
2. Specs:
Key Features
• .5 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• 2 channel
• Triple 0 awg power and ground inputs
We recommend for installation
• 1 upgraded battery under the hood
• 3 extra 800ci battery in the rear
• Minimum of two 0 awg ran from the front battery to the rear batterys
• All 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 6 runs into the amp
• 2 upgraded aftermarket alternators
• Dash mounted voltage meter
Features Voltage 12.0K
Output Power (RMS) 4 ohm 14.4V 1,200W x 2
2 ohm 2,100W x 2
1 ohm 3,400W x 2
.5 ohm 12V 4,200W x 2
.5 ohm 14.4V 5,500W x 2
.5 ohm 16V 6,500W x 2
Working Voltage 8.5V~16V
Frequency Response Hz (-3dB) Hz 20~250
Signal to Noise Ratio dB 100
Damping factor 250
Efficiency @ 4ohm % 85%
Low Level Input V 6V - 0.2mV
Line Output Yes
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Bass Boost
( @45Hz ) Switchable
Variable dB 0 ~ 9
Subsonic Filter Switchable
( @ 24dB slope ) Variable Hz 10~50
Remote Level Control Yes
Double Sided board 2 oz
3 oz Yes
Indicator Power Yes
Protection Yes
Speaker & Power terminal Mold Type Yes
Power Gauge 0Ga x 3
Fuses External Yes
Heatsink Length mm (inch) 850(33.46)
3. Description/Condition:
Cosmetic:
i would rate the amp 8/10. Minor face scratches, but scratches on the mounting feet, and underbelly of the amp.
Mechanically:
the amp does turn on, however somewhere on the signal processing side of the amp, there is a broken solder connection (see pics). There are no burnt components on this amp. I just do not have the knowledge to fix this amp my self, nor do i have the time to send that amp to DBr.
4. Price: :
I see these go used in working order for around 1700 shipped.... since mine doesnt work, i will price mine under the assumption that it would need a new board (i guess $600 for all repairs and shipping, shouldn't even be close to that)
that puts me at $1100 for the amp, however, i will also take $150 off due to the new owner having to either repair the amp, or sending it in to get fixed.
So i will sale the amp at $950 shipped... OBO
any questions or concerns, please do not hesitate to send me a text (712) 660-0703. I will answer back as soon as i can.
5. Pictures:
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).