picked up a mach 5 spl today

Twistid
5,000+ posts

150.5
a 12" ... to bad my 13ov2 is louder //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

lol on my temporary amp i had the 13ov2 wired to 2 ohms , but the mach5 is wired to 4 , they get about the same but obviously the 13ov2 sounded better and got the lows wayy better (it was a 2 chan amp which is why i dont want to drop it to 1 ohm)

the only problem is now when i get my saz back i have to pull it out again and re-wire it to 1 ohm //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif it was such a ***** just getting it to mount sideways!

i hope it gets decently loud in my hatchback... im hoping it does better than my previous setups of 2 12 L7's , jugg, atomic spl...

 
p1010016ni7.jpg


p1010017pq4.jpg


 
i want to do 2 1500's, but i dont have the electrical //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i think (1) 1500 is pushing it on my stock electrical with just a kinetik 600 in the back... (and upgraded ground under the hood, i would have completed the big3 but the alt. is unaccessable without removing a coolant or windshield fuild reservoir)

 
i want to do 2 1500's, but i dont have the electrical //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i think (1) 1500 is pushing it on my stock electrical with just a kinetik 600 in the back... (and upgraded ground under the hood, i would have completed the big3 but the alt. is unaccessable without removing a coolant or windshield fuild reservoir)
So remove it and finish the big 3. You could do a 1500 nicely with all 1/0, big 3 and the batts you have.

 
hey thanks alot! my parents are moving to the ashville mountains though, i hear its really pretty up there //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
So remove it and finish the big 3. You could do a 1500 nicely with all 1/0, big 3 and the batts you have.
oh the 1500 is comming //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif , i just need to decide to wait to recieve it, or go out and buy a new one //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I mean if your wanting to go cheap and you like making things i guess you could always make your own , is all you really need is a DMM a...
3
1K
Excellent place to get a Tuned enclosure with everything Precut and ready to put together with a Diagram of each sheet Marked. $190 bucks. All you...
15
3K
You're not going to know until you test with a meter. Typically even carpeting a box as opposed to painting is going to lose a few tenths.
3
1K
Highest my car has done is a 156. I have 1200w on highs and recently swapped the mids to pro audio mids. This was a challenge as I find many of...
6
1K

About this thread

Twistid

5,000+ posts
150.5
Thread starter
Twistid
Joined
Location
in a space out of sound
Start date
Participants
Who Replied
Replies
50
Views
4,015
Last reply date
Last reply from
DDeitz
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top