which JL sub for my 500/1

ckelley
10+ year member

Member
I got a good deal today on a 500/1 on ebay. Now im looking for sub to go with it. I wanna stay with JL but dont know which Sub or Subs to get...

I mostly listen to rap so looking for more spl than anything

Ive narrowed the choices down to

1. 1 10w6 ported

2. 2 10'w3v3 or w3v2 (since they are a lil cheaper)

3. 1 13w6 ported (dont know if ill have enough to push it though)

4 1 12w3v3

Thanks

 
#3

for Jl prices you could almost get a IDmax

If you like ported a dd1512 is 500 rms and costs less than any jl listed.

there are other options, you will be happy either way.

 
Any others? If not JL then i wouldnt wanna go over $200. I had a Type r on the 500/1 before and it was great, just looking for something different this time since i sold the last setup.

What about an SSD

 
x2. I have this and it sounds phenominal with plenty of boom. See below:

DSC_9894.jpg


I also had two 12W3v2's running off a 500/1 in my previous set up and it also sounded very good and had plenty of boom.

 
Nice.... Which sub is that though?
Is there any difference in those new JL amps vs the old ones?
I said option 3, which would be the 13W6.

The only differences between the v1 and v2 slash amps is the exterior is a little different on the v2's (see above. The just took the raised rib out and made the logo and engraved cirlce) and the v2's are more efficient at dissapating heat. 50% more efficient. That's not to say the v1's weren't, these are just more so.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Please excuse this extra question .. Is there a specified patch lead or compatible bypass harness for the factory amp or would I have to create it...
4
875
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
254
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
569

About this thread

ckelley

10+ year member
Member
Thread starter
ckelley
Joined
Location
japan(military)
Start date
Participants
Who Replied
Replies
10
Views
774
Last reply date
Last reply from
PatFitz9
Screenshot_20240611-211145.png

Blackout67

    Jun 11, 2024
  • 0
  • 0
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0

New threads

Top