I’ve been hearing a lot about tuning the box or knowing what it’s tuned to. I have a prefabed ported box which specs show it’s tuned to 36hz. Is this set in stone or do the subs I chose make a difference? Can the tune be changed by other means than replacing the ports? I got into a couple yo tubbe vids in which the title was seemingly what I wanted yet some words were missing and I began to believe it was translated from another language but by someone who had no idea wtf they were talking about.
The box is now discontinued by sound ordinance. It’s ports are on the bottom outside corners. 1.75cu/ft each of 2 sides housing 2 12 800w subs being fed 1600+ @ 2ohms.
Will this have remained at 36hz?
I see there’s a lot of math, symbols and I believe that’s more from a design perspective.
Will these subs change the tuning from 36 or is that what they’re at. Would twin 250w shallow subs be at 36hz?
Thanks in advance..
The box is now discontinued by sound ordinance. It’s ports are on the bottom outside corners. 1.75cu/ft each of 2 sides housing 2 12 800w subs being fed 1600+ @ 2ohms.
Will this have remained at 36hz?
I see there’s a lot of math, symbols and I believe that’s more from a design perspective.
Will these subs change the tuning from 36 or is that what they’re at. Would twin 250w shallow subs be at 36hz?
Thanks in advance..