Is the best way to set the gain on these Taramps to use pink noise and set the amp gain till it just clips on the little 3 light indicator? How are you all setting the gains on Taramps?
Hello All,
I'm an old time SQL-head from the early 00s, having ran lots of Nakamichi, CDT, Cadence, USAmps, equipment. The new cars aren't as easy as those back then. I have a new 2023 Challenger with the butt-quality Alpine System and want to do a full upgrade.
1. What is the best Line Out...
I have a single 10” JlW7-3 in the red eye box. I want a really high quality amp that I can find pre-owned for a good price… what are the best ones you would recommend and why?
factory specs:
Continuous power handling 750W RMS
(1500W Peak Power)
3 OHM Mono
Frequency 20-250 Hz
i’m not sure what amp i should run. i want to wire 4 DS18 PRO-GM6B which are 480w max and 140w rms, i also wanted to add 4 DS18 PRO-TWX1/BK which are 240w peak and 120w rms. i’m just trying to figure out what amp or amps i should run. thank you.
Hello Everyone,
I'm looking for some assistance. I have an 2004 RX330 with a stereo that emits an extremely high pitched whine - the frequency of the sound will change when moving the radio dial and reaches frequencies that my old ears cannot register, but others can hear it. The stereo...
Hi!
Bugging you guys once again. I'm looking for an amplifier for a subwoofer since my old one finally gave out.
My subwoofer is Gladen SQX 12, and I want to drive it at its max power ( 600rms at 4ohm).
( I usually listen to pretty loud music and also I like all the bass i can get)
I dont need...
Hey everyone. I'm new here so I don't know how this works but....I'm looking to buy a Crossfire BMF1000D amplifier. If anyone has one for sale please hit me up. SERIOUS BUYER!!!
2015 honda civic
CT Sounds CT-400.1D Compact Class D Car Audio Monoblock Amplifier, 400 Watts RMS
2 PIONEER TS-SW2502S4 10-Inch, 1.200 Watts Shallow-Mount Subwoofers
The problem I'm having is...
The amp goes into protection mode for the duration of a
particular frequency, when heavy bass is...
Say I have an amp that has X amount of power. The speakers can't actually handle that power but I still want to use the amp. How is an amp properly adjusted to limit the output to the speaker's capabilities?
Hello and good day to all car audio .com family. So today I have a quartorigo prestigio class a amplifier for sale . I bought this about a year ago thinking I was going to use it for one of my projects but unfortunately my project needs a engine. So I guess time to sell this beautiful...
My folks have an old subwoofer in their home stereo. The plate amplifier on the back of subwoofer cabinet seems to have died.
I was gonna buy a replacement but the replacement size isn't identical.
I'm sitting on 2 subwoofer amps from my car. 1 300w @ 4ohm Alpine and 1 500w @ 4ohm Kenwood...
Hello, I have a 2023 Mazda CX-5 w/ Bose.
I want to know if there is any audio interface that can be used so that I can hook up a bass amp and subwoofer while using the rest of the stock audio system. If not what other options do I have like a line output converter(LOC) and or digital signal...
I have 3 amps that need repaired
Kx800.4, Kx600.4, Kx300.4
All come on and play but have a buzzing, left channel comes and goes and a RCA input issue seems if I wiggle the connection in n out it plays fine for a moment
I Found an Alpine 3522 amp but no manual to go with it, and was wondering what info was out there, and how good they were.
My dad said it still works but, he couldn't recall anything about it.
Zapco Z-1KD II Subwoofer amp with Remote Gain Knob. $350each/Firm no trades... I have Two of these amps for sale...
Features and Functions
Mono Class D Linkable, bass amplifier,
Stable into 1 Ohm (2 Ohm w/2 amps Linked/Strapped)
PWM MOSFET power supply
24 dB Variable low pass (LPF) crossover
12...
Looking at picking up a 10" Kicker L7R 4ohm sub, but wondering what amp I should get to pair with it, and if it's worth getting a 4ohm or if I should just get the 2ohm to make life easier. I have a 1997 Acura Integra that I've been moding to be a daily driver for the past year, and want to add...
I've posted about this topic a couple times already, but I have yet to find a solution. I installed an after market amplifier to power my mids and highs. I already have a sub amp that isn't having the same issues. My stereo is a JVC KW-M780BT. The amplifier powering the whine is a Infinity...
Back in 2009 I purchased an Infinity Kappa Five amplifier That looks like the picture here:
My current Kappa Five (LINK)
Due to a possible grounding issue 3 weeks ago, I get to replace it. I can't be too mad, it lasted 14 years. :)
I found one of these new in the box for $299
The...
I just installed a factory refurbished Infinity Refrence 3004A 4-Channel Amplifier. I have the speaker connected to the amp with 14 guage ofc speaker wire, the power and grounds are 4 guage ofc. I tried to test the first speaker, and there's a constant buzzing independent of stereo volume. The...
I am rather new to car audio so excuse my lack of expert vocabulary.
I installed a single 10 inch subwoofer box, and all new JL door speakers and dash tweeters into my 2020 Silverado 1500. Everything played great for awhile but I started to hear a popping / scratching sound when I turned the...
I'm adding subs to my 2003 BMW Z4. I'm an electronics engineer but don't really play with audio much.
I'll be using the factory subs which are 2 ohm. I can easily get the audio from the existing rear speakers and feed it to the amp.
I'd like the audio feed to turn the power on at the amp if...
I have bought a car with a very professionally installed Kenwood system from the early 2000s I assume.
The issue i'm facing is in the Kenwood KAC-8404 Amplifier. For some reason the A-channel only output on the right speaker. The mono switch forces audio to the left channel and so there is no...
Hi.
I will be trying to hook up an amp and subwoofer in the Mg marvel r with the Bose sound system.
Does anyone happen to know which color the +- on left and right rear speaker is?
FS: JVC KW-Z1000W 10.1” floating head unit
Condition (1 being worst - 10 being best) 9.5
JL Audio XD 700/5v2 5ch amp
$325–Free shipp——SOLD
Condition (1 being worst - 10 being best) 9
Wavetech Link 8 Line output converter
Condition (1 being worst - 10 being best)
$90–Free shipping...
Hello guys,
I bought today a 4 channel TRF M600.4AB amplifier and dont know what fuse to use for power cable. On the internet i have read that because my amp has 2 fuses 40 amps each, i have to use a 80 ampere fuse. But my amps manual says that i need to use a 40 ampere fuse. What is the right ?
Hello,
I want to buy a 4 channel TRF M600.4AB amplifier (600 watt RMS, 1200 watt max) and connect to it a 12" TRF VLSW122D2 Subwoofer (250 watt RMS) and 2 front JBL Stage 2 604C speakers (6.5'', 45 watt RMS each).
Should i use an 8 AWG power cable to my amp or an 4 AWG?
Also what gauge wire...
Hello,
I have a TRF M600.4AB amplifier which power is 80 watt RMS per channel (at 4 ohms) and i want to connect to it my front speakers (JBL Stage 2 604C) which are 45 watt RMS and 4 ohms. Is this possible or the speakers will be blown up? Do i necessarily have to buy new speakers above 80 watt RMS?
Hello guys,
I own a Mercedes A 140 W168 and i want to install a 4 channel TRF M600.4AB amplifier (600 watt RMS, 1200 watt max) and connect to it a 12'' TRF VLSW122D2 Subwoofer (250 watt RMS) and 2 additional speakers on car's shelf (85 watt RMS each). So the music will be performed by 6...
Hello guys,
I want to buy a TRF M600.4AB amplifier (4 channels, 600 watt RMS max, max RMS power 4ohm 80W*4, max RMS power bridged 4ohm 300W*2) and a TRF VLSW123D2 Subwoofer (12'', 350 watt RMS, dual 2ohm voice coil) for my car.
And i want to connect the "2 voice coils" of the sub in series (so...
I currently own a 2000 Chevrolet Cavalier that I am currently building a subwoofer install in.
My complete and current installs:
New Kenwood KDC-BT378U radio with built-in speaker amp, All new door and deck speakers. (COMPLETE)
Big 3 Kit, Mechman 270 AMP Alternator, (1) Sundown ZV6 12" 2-OHM...
I know it’s a 2 channel amp but there is no brand name on it and I don’t know how many watts it is. I need to know what kind of amp I have if anyone can help.
I just purchased a 2000 Chevrolet cavalier LS 4DR. I am going to be purchasing (2) Sundown X 12 2 ohms (1500 watts a piece) and (1) Crescendo Bass Clef 6000W Amp In the next coming weeks. I will be custom building my box.
I was wondering what electrical upgrades I will need to power this system...
Hi Guys,
I just bought this Audison lrx 2.9 amplifier. The amp is wired correctly. Trying to run JBL 1220D (2ohms per coil) . Connected the positive to speaker left positive and negative to speaker right negative. Ground is connected to NEGATIVE and Battery to POSITIVE. Switched between mono...
I have no idea how I am supposed to put my wires in here (third pic) with that metal thing that seems to be in the way. Is there a certain connector or adapter I need? If so please help and tell me what I need to get? This is the only help I need. Thank you.
Selling 3 Amps. 2 Memphis Belle 16-MC1300Ds one in perfect working order $350 plus shipping obo, the other channels 1, 2 and sub work channels 3 & 4 do not. Believe has possible bad input stage had estimate of $125 to fix. Will take $125 plus shipping obo. 1 Arc Audio 300.4 in perfect working...
Hello guys, i'm new on this forum and i have a question for you. I'm using 2 speakers JBL CS1214, 1000w peak, 250w RMS each. These speakers are amplified by a TOXIC TX 1600-N. The question is: can this amplifier run on 2omhs in bridge ? I was searching about this amplifier and i didn't found...
Hello guys, I currently have Opel Astra 3 door car, which is pretty small car, and wanted to upgrade the audio system, bought a good Sony CD player with bluetooth, and those speakers - Hertz DSK 170.3 & Hertz CX 165, they are rated from 80W to almost 200, they have different Watt ratios so my...