HELP ME PLEASE!? Kicker L7 making "Rattling sound"

um, tma amps, are jl amps....... if memory serves right, the bass boost on those boosts the gain from something like 100-30hz, but not above and below. so, it's like setting lpf and ssf slopes

 
yah, what is the specs on the box? get some excursion video with sweeps. try and use a camera without blur correction... all these new phone cameras pizz me off

 
16 1/2" Tall X 21 1/2" Wide X 18" Deep
are you sheetin me? you are netting less than 2 cubes for that sub.....vented....... you need to build a box 3-2x that size. 6cu. net + port is what the sub really wants, and anything under 4.5, it's not really worth running an L7. 3 is the bare bottom you should go.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Is this a blue or blue/white wire from the Kenwood? The ACC wire is red and although that should turn on the amp, it is not the prefered wiring...
1
769
That's awesome. I used to be big into car Austin the '90s. Since then I have always had some sort of mild system for my wife's vehicles, but...
4
1K
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
The sound deadening is going to be more about preventing vibration from metal surfaces and adding unwanted noise. Does it have the JBL system...
1
758
It's called the K.I.S.S. preciniple ("Keep it simple, stupid!")... Takes the guesswork out of parallel/series wiring.
2
984

About this thread

ktwagner

10+ year member
Member
Thread starter
ktwagner
Joined
Location
Novato, California, United States
Start date
Participants
Who Replied
Replies
155
Views
39,181
Last reply date
Last reply from
slvrado28z
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top