A align600 10+ year member Junior Member 18 0 Melbourne, Australia Aug 12, 2012 #16 trenthonda1 see's diagram... instant face palm:wallbash:
S Sub Woofin 10+ year member CarAudio.com Elite 1,545 1 California Aug 12, 2012 #17 OP wants to run the sub at 2 ohms. not 4, guys
A align600 10+ year member Junior Member 18 0 Melbourne, Australia Aug 12, 2012 #19 if u got a d2 means dual 2ohm voice coils, u can only run this as a 1ohm or 4ohm load wiring configuration, meaning with the amp u got, u can only run it at 4ohm, so ur only feeding it 500watts. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_2ohmDVC_1ohm.png http:// http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_2ohmDVC_4ohm.png if u had a d4, dual 4ohm voice coils, yes u could wire it down to a 2ohm load. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_4ohmDVC_2ohm.png the only way ur going to run that amp at full power is to run a dual 4ohm voice coil sub, or get another dual 2ohm voice coil sub and wire it in series to create a 2ohm final load. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/2_2ohmDVC_2ohm.png this amp is NOT designed to run at 1ohms. lowest impedance is 2OHM!! @1000watts rms.
if u got a d2 means dual 2ohm voice coils, u can only run this as a 1ohm or 4ohm load wiring configuration, meaning with the amp u got, u can only run it at 4ohm, so ur only feeding it 500watts. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_2ohmDVC_1ohm.png http:// http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_2ohmDVC_4ohm.png if u had a d4, dual 4ohm voice coils, yes u could wire it down to a 2ohm load. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/1_4ohmDVC_2ohm.png the only way ur going to run that amp at full power is to run a dual 4ohm voice coil sub, or get another dual 2ohm voice coil sub and wire it in series to create a 2ohm final load. http://www.rockfordfosgate.com/rftech/images/woofer_wizard/2_2ohmDVC_2ohm.png this amp is NOT designed to run at 1ohms. lowest impedance is 2OHM!! @1000watts rms.
C cyn 10+ year member CarAudio.com Elite 1,909 1 Orange, Texas Aug 12, 2012 #20 Use 8G or 10G wire man... and for the good of this thread DON'T EVER FSKING DOUBLE UP YOUR WIRE FROM THE AMP TO SUB
Use 8G or 10G wire man... and for the good of this thread DON'T EVER FSKING DOUBLE UP YOUR WIRE FROM THE AMP TO SUB